更新Firebird数据库Embed模式的动态链接库到最新版
nnhy authored at 2011-03-08 17:07:33
145.07 KiB
X_NET20
�<D�Ú/1��������������<���arithmetic exception, numeric overflow, or string truncation������invalid database key������file @1 is not a valid database����.���invalid database handle (no active connection)�����+���bad parameters on attach or create database����%���unrecognized database parameter block���������invalid request handle��������invalid BLOB handle�	������invalid BLOB ID�
���0���invalid parameter in transaction parameter block���.���invalid format for transaction parameter block�����A���invalid transaction handle (expecting explicit transaction start)���
���(���internal Firebird consistency check (@1)���!���conversion error from string "@1"������"���database file appears corrupt (@1)��������deadlock���*���attempt to start more than @1 transactions�����#���no match for first value expression����3���information type inappropriate for object specified����:���no information of this type available for object specified��������unknown information item���;���action cancelled by trigger (@1) to preserve data integrityr��� ���invalid request BLR at offset @1���-���I/O error during "@1" operation for file "@2"ata���$���lock conflict on no wait transaction������corrupt system table���*���validation error for column @1, value "@2"me���%���no current record for fetch operation������V���attempt to store duplicate value (visible to active transactions) in unique index "@1"et���4���program attempted to exit without finishing database������unsuccessful metadata update ���$���no permission for @1 access to @2 @3!������transaction is not in limboc"������invalid database key#������BLOB was not closed�$������metadata is obsolete%���=���cannot disconnect database with open transactions (@1 active) tr&���2���message length error (encountered @1, expected @2)��'���$���attempted update of read-only column(���#���attempted update of read-only tablet)���-���attempted update during read-only transactionnfo*������cannot update read-only view @1�+������no transaction for requestr ,������request synchronization error���-���*���request referenced an unavailable databasedu.���+���segment buffer length shorter than expectedn/���/���attempted retrieval of more segments than existe0���%���attempted invalid operation on a BLOB "@1���"���attempted read of a new, open BLOBer2���,���attempted action on BLOB outside transaction3���!���attempted write to read-only BLOBnde4���3���attempted reference to BLOB in unavailable database 5���$���operating system directive @1 failed6���8���attempt to fetch past the last record in a record stream7������unavailable database8���8���table @1 was omitted from the transaction reserving list9���F���request includes a DSRI extension not supported in this implementationtr:������feature is not supported;���E���unsupported on-disk structure for file @1; found @2.@3, support @4.@5���<���!���wrong number of arguments on call���=������Implementation limit exceedednsa>������@1��?���0���unrecoverable conflict with limbo transaction @1@������internal error��A������internal error aB������too many requests���C������internal errorgtD���-���block size exceeds implementation restrictionf mE������buffer exhaustedF���:���BLR syntax error: expected @1 at offset @2, encountered @3reG���
���buffer in useBerH������internal erroronI������request in useacJ���)���incompatible version of on-disk structure���K������table @1 is not defined L���$���column @1 is not defined in table @2M������internal erroredN������internal errorchO������internal errorinP������internal error��Q������internal error��R������internal erroredS���0���page @1 is of wrong type (expected @2, found @3)T������database corruptedsuU���"���checksum error on database page @1atV������index is broken�W������database handle not zeroX������transaction handle not zero Y���5���transaction--request mismatch (synchronization error)mplZ������bad handle count[���,���wrong version of transaction parameter block\���5���unsupported BLR version (expected @1, encountered @2)���]���)���wrong version of database parameter blockoo ^���<���BLOB and array data types are not supported for @1 operation_������database corrupted m`������internal erroreda������internal errororb������transaction in limboc������transaction not in limbod������transaction outstandingne���'���connection rejected by remote interfacerf������internal errorurg������internal errors h������no lock manager availablenoti���"���context already in use (BLR error)edj������context not defined (BLR error)lk������data operation not supportedl������undefined message numberm������bad parameter numbern���/���unable to allocate memory from operating systemeo���!���blocking signal has been receivedabap������lock manager errorisq���%���communication error with journal "@1"���r���:���key size exceeds implementation restriction for index "@1"(ss������null segment of UNIQUE KEYd t������SQL error code = @1eu������wrong DYN version���v������function @1 is not definedxpw��� ���function @1 could not be matchedx�������y���%���database detach completed with errorsandz���'���database system cannot read argument @1a{���(���database system cannot write argument @1|������operation not supportedr}������@1 extension errorbo~���
���not updatableot ������no rollback performeduts€��������������‚������@1 rƒ���'���update conflicts with concurrent updater„������product @1 is not licensed��…������object @1 is in uset†���.���filter not found to convert type @1 to type @2nt‡��� ���cannot attach active shadow fileˆ���/���invalid slice description language at offset @1r‰������subscript out of bounds�Š���D���column not array or invalid dimensions (expected @1, encountered @2)‹���,���record from transaction @1 is stuck in limboŒ���)���a file in manual shadow @1 is unavailable������6���secondary server attachments cannot validate databases��Ž���4���secondary server attachments cannot start journaling������generator @1 is not defined����1���secondary server attachments cannot start loggingoul‘������invalid BLOB type for operatione’���6���violation of FOREIGN KEY constraint "@1" on table "@2" r“���+���minor version too high found @1 expected @2e”������transaction @1 is @2•���'���transaction marked invalid by I/O error�–��� ���cache buffer for page @1 invalid—���(���there is no index in table @1 with id @2˜���h���Your user name and password are not defined. Ask your database administrator to set up a Firebird login.™������invalid bookmark handleeš������invalid lock level @1t a›���-���lock on table @1 conflicts with existing locktioœ���2���requested record lock conflicts with existing lock�����'���maximum indexes per table (@1) exceededež���7���enable journal for database before starting online dumptŸ������online dump failure. Retry dumpa ���%���an online dump is already in progressver¡���5���no more disk/tape space.  Cannot continue online dumpver¢���7���journaling allowed only if database has Write-ahead Log�£���?���maximum number of online dump files that can be specified is 16a¤���5���error in opening Write-ahead Log file during recoverycon¥������invalid statement handle¦���!���Write-ahead log subsystem failureted§������WAL Writer error¨������Log file header of @1 too smalll©������Invalid version of log file @1orª���;���Log file @1 not latest in the chain but open flag still set�«���B���Log file @1 not closed properly; database recovery may be requiredtr¬���-���Database name in the log file @1 is differentark­���*���Unexpected end of log file @1 at offset @2ck®���1���Incomplete log record at offset @1 in log file @2ste¯���7���Log record header too small at offset @1 in log file @2e°���/���Log block too small at offset @1 in log file @2d±���@���Illegal attempt to attach to an uninitialized WAL segment for @1²���%���Invalid WAL parameter block option @1res³���(���Cannot roll over to the next log file @1´���%���database does not use Write-ahead Logd oµ���/���cannot drop log file when journaling is enabled�¶���"���reference to invalid stream numbers ·������WAL subsystem encountered erroro¸������WAL subsystem corruptedl¹���b���must specify archive file when enabling long term journal for databases with round-robin log filesL º��� ���database @1 shutdown in progress»���&���refresh range number @1 already in usee ¼���!���refresh range number @1 not found ch½������CHARACTER SET @1 is not defined ¾���!���lock time-out on wait transactionove¿������procedure @1 is not definedeÀ���)���Input parameter mismatch for procedure @1nexÁ���,���Database @1: WAL subsystem bug for pid @2
@3Â���0���Could not expand the WAL segment for database @1Ã������status code @1 unknown oÄ������exception @1 not definedÅ������exception @1Æ������restart shared cache managerÇ������invalid lock handleoÈ���$���long-term journaling already enabledÉ���,���Unable to roll over please see Firebird log.Ê���(���WAL I/O error.  Please see Firebird log.Ë���J���WAL writer - Journal server communication error.  Please see Firebird log.��Ì���:���WAL buffers cannot be increased.  Please see Firebird log.enÍ���*���WAL setup error.  Please see Firebird log.��Î������obsoleteÏ���+���Cannot start WAL writer for the database @1aÐ������database @1 shutdownÑ���(���cannot modify an existing user privilegeÒ���?���Cannot delete PRIMARY KEY being used in FOREIGN KEY definition.uÓ���5���Column used in a PRIMARY constraint must be NOT NULL.���Ô���@���Name of Referential Constraint not defined in constraints table.Õ���=���Non-existent PRIMARY or UNIQUE KEY specified for FOREIGN KEY.aseÖ���0���Cannot update constraints (RDB$REF_CONSTRAINTS).×���2���Cannot update constraints (RDB$CHECK_CONSTRAINTS). uØ���<���Cannot delete CHECK constraint entry (RDB$CHECK_CONSTRAINTS)Ù���;���Cannot delete index segment used by an Integrity ConstraintgÚ���;���Cannot update index segment used by an Integrity ConstraintsÛ���3���Cannot delete index used by an Integrity Constraint Ü���3���Cannot modify index used by an Integrity Constraint�Ý���0���Cannot delete trigger used by a CHECK ConstraintÞ���0���Cannot update trigger used by a CHECK Constraintß���;���Cannot delete column being used in an Integrity Constraint.aà���;���Cannot rename column being used in an Integrity Constraint.ná���5���Cannot update constraints (RDB$RELATION_CONSTRAINTS).in â���"���Cannot define constraints on viewsd ã���A���internal Firebird consistency check (invalid RDB$CONSTRAINT_TYPE)onsä���9���Attempt to define a second PRIMARY KEY for the same tableARYå���'���cannot modify or erase a system trigger�æ���0���only the owner of a table may reassign ownershipç���(���could not find table/procedure for GRANTè������could not find column for GRANTsé���1���user does not have GRANT privileges for operation inê���2���table/procedure has non-SQL security class defined uë���)���column has non-SQL security class definedntsì���>���Write-ahead Log without shared cache configuration not allowednní������database shutdown unsuccessful��î���:���Operation violates CHECK constraint @1 on view or table @2nnï������invalid service handleECð���"���database @1 shutdown in @2 secondseiñ���(���wrong version of service parameter blockò���$���unrecognized service parameter blockó������service @1 is not defined coô��� ���long-term journaling not enabledõ���5���Cannot transliterate character between character setsFirö���0���WAL defined; Cache Manager must be started first÷���7���Overflow log specification required for round-robin loglø���.���Implementation of text subtype @1 not located.��ù������Dynamic SQL Errorablú������Invalid commandpû������Data type for constant unknown fü������Invalid cursor referenceý������Data type unknownserþ������Invalid cursor declarationr ÿ������Cursor @1 is not updatablee ��� ���Attempt to reopen an open cursor��"���Attempt to reclose a closed cursorne�����Column unknownd �����Internal errorhe��
���Table unknownlow�����Procedure unknowndow�����Request unknown���I���SQLDA missing or incorrect version, or incorrect number/type of variablesid ��:���Count of read-write columns does not equal count of values��	�����Invalid statement handle
�����Function unknown�����Column is not a BLOB��0���COLLATION @1 for CHARACTER SET @2 is not defined
��5���COLLATION @1 is not valid for specified CHARACTER SETtwe�����Option specified more than once;�����Unknown transaction optionst�����Invalid array referencei��'���Array declared with too many dimensionsn�����Illegal array dimension range.�������Trigger unknowno��!���Subselect illegal in this contexttyp��1���Cannot prepare a CREATE DATABASE/SCHEMA statement�����3���must specify column name for view select expression ��,���number of columns does not match select list��=���Only simple column names permitted for VIEW WITH CHECK OPTION����*���No WHERE clause for VIEW WITH CHECK OPTION����1���Only one table allowed for VIEW WITH CHECK OPTION�����B���DISTINCT, GROUP or HAVING not permitted for VIEW WITH CHECK OPTIONri��3���FOREIGN KEY column count does not match PRIMARY KEYc��2���No subqueries permitted for VIEW WITH CHECK OPTIONnc��#���expression evaluation not supported������gen.c: node not supportedT @ �����Unexpected end of command @1!�����INDEX @1"�����EXCEPTION @1#��	���COLUMN @1pti$��
���Token unknownn o%�����union not supportedt&�����Unsupported DSQL constructre'�����column used with aggregateh (�����invalid column reference)�����invalid ORDER BY clause�*��3���Return mode by value not allowed for this data typex+��6���External functions cannot have more than 10 parameters��,��6���alias @1 conflicts with an alias in the same statement��-��9���alias @1 conflicts with a procedure in the same statementle .��5���alias @1 conflicts with a table in the same statemento W/�����Illegal use of keyword VALUE0��'���segment count of 0 defined for index @1�1��K���A node name is not permitted in a secondary, shadow, cache or log file name�2�����TABLE @13�����PROCEDURE @14�����cannot create index @1qu5��8���Write-ahead Log with shadowing configuration not allowed6�����there are @1 dependenciesen.7��"���too many keys defined for index @1 e8��N���Preceding file did not specify length, so @1 must include starting page numberun9��(���Shadow number must be a positive integer:��"���Token unknown - line @1, column @2d ;��7���there is no alias or table named @1 at this scope level <��!���there is no index @1 for table @2lue=��"���table @1 is not referenced in plante>��I���table @1 is referenced more than once in plan; use aliases to distinguishth ?��8���table @1 is referenced in the plan but not the from list@��'���Invalid use of CHARACTER SET or COLLATEaA��3���Specified domain or source column @1 does not exist�B��-���index @1 cannot be used in the specified plan0 dC��>���the table @1 is referenced twice; use aliases to differentiate��D��-���illegal operation when at beginning of streamshaE��"���the current position is on a crack@1F�����database or file existsnG��.���invalid comparison operator for find operationwiH�����Connection lost to pipe servererI�����bad checksumJ�����wrong page typeyK��G���Cannot insert because the file is readonly or is on a read only medium.sL��!���multiple rows in singleton selecthadM��"���cannot attach to password database��N��.���cannot start transaction for password databaseo O��$���invalid direction for find operationP��6���variable @1 conflicts with parameter in same procedures Q��4���Array/BLOB/DATE data types not allowed in arithmeticR��2���@1 is not a valid base table of the specified viewblS��A���table @1 is referenced twice in view; use an alias to distinguishf CT��@���view @1 has more than one base table; use aliases to distinguishU��*���cannot add index, index root page is full. sV�����BLOB SUB_TYPE @1 is not defined W��2���Too many concurrent executions of the same request��X��-���duplicate specification of @1 - not supportedshaY��@���violation of PRIMARY or UNIQUE KEY constraint "@1" on table "@2"Z��=���server version too old to support all CREATE DATABASE optionsonn[��#���drop database completed with errorsc\��'���procedure @1 does not return any valuesr]��3���count of column list and variable list do not matchs^��(���attempt to index BLOB column in index @1_��)���attempt to index array column in index @1ann`��?���too few key columns found for index @1 (incorrect column name?)oa��
���cannot delete���b��(���last column in a table cannot be deletedc��
���sort errorrad�����sort error: not enough memory are�����too many versions a f�����invalid key positiong��+���segments not allowed in expression index @1 h��(���sort error: corruption in data structurei��&���new record size of @1 bytes is too bigtoj��&���Inappropriate self-reference of columnotk��/���request depth exceeded. (Recursive definition?) l��"���cannot access column @1 in view @2��m��)���dbkey not available for multi-table viewsrten�����journal file wrong formator o�����intermediate journal file full2"p��H���The prepare statement identifies a prepare statement with an open cursorq�����Firebird errord r�����Cache redefinedcs��1���Insufficient memory to allocate page buffer cachemn t��
���Log redefinedt du�����Log size too smallt v�����Log partition size too smallw��<���Partitions not supported in series of log file specificationx��3���Total length of a partitioned log must be specified�y�����Precision must be from 1 to 18 az��(���Scale must be between zero and precision{�����Short integer expectedor|�����Long integer expected a }�����Unsigned short integer expectedm~�����Invalid ESCAPE sequencei��1���service @1 does not have an associated executable��€�����Failed to locate host machine. b�����Undefined service @1/@2.‚��K���The specified name was not found in the hosts file or Domain Name Services.�ƒ��D���user does not have GRANT privileges on base table/view for operation„�����Ambiguous column reference.u…�����Invalid aggregate reference †��F���navigational stream @1 references a view with more than one base tablerr‡��7���Attempt to execute an unprepared dynamic SQL statement.cˆ�����Positive value expected�‰��'���Incorrect values within SQLDA structure�Š�����invalid blob idt‹��2���Operation not supported for EXTERNAL FILE table @1fiŒ�����Service is currently busy: @1of ��1���stack size insufficent to execute current requestt bŽ�����Invalid key for find operationbe��(���Error initializing the network software.��#���Unable to load required library @1.�‘��0���Unable to complete network request to host "@1".’��!���Failed to establish a connection.ave“��1���Error while listening for an incoming connection. ma”��@���Failed to establish a secondary connection for event processing.•��?���Error while listening for an incoming event connection request.�–��'���Error reading data from the connection.b—��%���Error writing data to the connection. co˜��7���Cannot deactivate index used by an integrity constrainti™��;���Cannot deactivate index used by a PRIMARY/UNIQUE constraintrš��3���Client/Server Express not supported in this releasee›������œ��5���Access to databases on file servers is not supported.QLD��!���Error while trying to create file���ž�����Error while trying to open fileLŸ�� ���Error while trying to close file ��$���Error while trying to read from file¡��#���Error while trying to write to file ¢��!���Error while trying to delete filetia£��!���Error while trying to access filee t¤��K���A fatal exception occurred during the execution of a user defined function..¥�����connection lost to databasec¦��(���User cannot write to RDB$USER_PRIVILEGES§�����token size exceeds limit¨��B���Maximum user count exceeded.  Contact your database administrator.��©��t���Your login @1 is same as one of the SQL role name. Ask your database administrator to set up a valid Firebird login.ª��N���"REFERENCES table" without "(column)" requires PRIMARY KEY on referenced tableUN«��>���The username entered is too long.  Maximum length is 31 bytes.le¬��?���The password specified is too long.  Maximum length is 8 bytes.d­��*���A username is required for this operation.��®��)���A password is required for this operation wh¯��)���The network protocol specified is invalidg t°��8���A duplicate user name was found in the security database±��>���The user name specified was not found in the security databaseac²��3���An error occurred while attempting to add the user.x³��=���An error occurred while attempting to modify the user record.sec´��=���An error occurred while attempting to delete the user record.ceeµ��7���An error occurred while updating the security database.b¶��'���sort record size of @1 bytes is too big�·��;���can not define a not null column with NULL as default value ¸�����invalid clause --- '@1'p¹��!���too many open handles to databaseES º�� ���size of optimizer block exceeded»��/���a string constant is delimited by double quotesd¼��!���DATE must be changed to TIMESTAMP.le½��&���attempted update on read-only databaseax¾��0���SQL dialect @1 is not supported in this database¿��A���A fatal exception occurred during the execution of a blob filter.��À��]���Access violation.  The code attempted to access a virtual address without privilege to do so.ty Á��h���Datatype misalignment.  The attempted to read or write a value that was not stored on a memory boundary.Â��\���Array bounds exceeded.  The code attempted to access an array element that is out of bounds.Ã��m���Float denormal operand.  One of the floating-point operands is too small to represent a standard float value.secÄ��\���Floating-point divide by zero.  The code attempted to divide a floating-point value by zero.Å��u���Floating-point inexact result.  The result of a floating-point operation cannot be represented as a deciaml fraction.dleÆ��c���Floating-point invalid operand.  An indeterminant error occurred during a floating-point operation.oÇ��k���Floating-point overflow.  The exponent of a floating-point operation is greater than the magnitude allowed. È��m���Floating-point stack check.  The stack overflowed or underflowed as the result of a floating-point operation.���É��i���Floating-point underflow.  The exponent of a floating-point operation is less than the magnitude allowed.misÊ��e���Integer divide by zero.  The code attempted to divide an integer value by an integer divisor of zero.ndsË��m���Integer overflow.  The result of an integer operation caused the most significant bit of the result to carry.of Ì��M���An exception occurred that does not have a description.  Exception number @1.���Í��i���Stack overflow.  The resource requirements of the runtime stack have exceeded the memory available to it.���Î��L���Segmentation Fault. The code attempted to access memory without priviledges.Ï��H���Illegal Instruction. The Code attempted to perfrom an illegal operation.Ð��.���Bus Error. The Code caused a system bus error.-pÑ��\���Floating Point Error. The Code caused an Arithmetic Exception or a floating point exception.Ò��'���Cannot delete rows from external files.gÓ��%���Cannot update rows in external files.undÔ��P���Unable to perform operation.  You must be either SYSDBA or owner of the databaseÕ��7���Specified EXTRACT part does not exist in input datatypemÖ��b���Service @1 requires SYSDBA permissions.  Reattach to the Service Manager using the SYSDBA account.nt×��E���The file @1 is currently in use by another process.  Try again later.perØ��!���Cannot attach to services managertheÙ��O���Metadata update statement is not allowed by the current database SQL dialect @1cÚ�����operation was cancelledcÛ��7���unexpected item in service parameter block, expected @1�Ü��?���Client SQL dialect @1 does not support reference to @2 datatype Ý��K���user name and password are required while attaching to the services managerpÞ��g���You created an indirect dependency on uncommitted metadata. You must roll back the current transaction.nß��#���The service name was not specified.xà��E���Too many Contexts of Relation/Procedure/Views. Maximum allowed is 255 roá��&���data type not supported for arithmeticorâ��*���Database dialect being changed from 3 to 1f ã�����Database dialect not changed. paä�����Unable to create database @1å��+���Database dialect @1 is not a valid dialect.aæ�����Valid database dialects are @1.Sç�����SQL warning code = @1ileè��&���DATE data type is now called TIMESTAMPryé��S���Function @1 is in @2, which is not in a permitted directory for external functions.nê��'���value exceeds the range for valid datesaë��0���passed client dialect @1 is not a valid dialect.ì�����Valid client dialects are @1.���í��6���Unsupported field type specified in BETWEEN predicate. dî��K���Services functionality will be supported in a later version  of the product ï�����GENERATOR @1ð�����UDF @1irñ��<���Invalid parameter to FIRST.  Only integers >= 0 are allowed.ò��;���Invalid parameter to SKIP.  Only integers >= 0 are allowed.�ó��f���File exceeded maximum size of 2GB.  Add another database file or use a 64 bit I/O version of Firebird.itô��<���Unable to find savepoint with name @1 in transaction contextõ��-���Invalid column position used in the @1 clauseateö��F���Cannot use an aggregate function in a WHERE clause, use HAVING insteadda÷��5���Cannot use an aggregate function in a GROUP BY clause���ø��c���Invalid expression in the @1 (not contained in either an aggregate function or the GROUP BY clause) ù��^���Invalid expression in the @1 (neither an aggregate function nor a part of the GROUP BY clause)@1ú��*���Nested aggregate functions are not allowed��û��@���Invalid argument in EXECUTE STATEMENT - cannot convert to stringü��,���Wrong request type in EXECUTE STATEMENT '@1'ý��^���Variable type (position @1) in EXECUTE STATEMENT '@2' INTO does not match returned column typeinþ��.���Too many recursion levels of EXECUTE STATEMENTKIÿ��3���Access to @1 "@2" is denied by server administratora���C���Cannot change difference file name while database is in backup modef��>���Physical backup is not allowed while Write-Ahead Log is in useon�����Cursor is not openlu��1���Target shutdown mode is invalid for database "@1" ag��E���Concatenation overflow. Resulting string cannot exceed 32K in length. ag��M���Invalid offset parameter @1 to SUBSTRING. Only positive integers are allowed.tai��+���Foreign key reference target does not exist ��1���Foreign key references are present for the recordagg��
���cannot update pa	�����Cursor is already open��
�����@1 a��0���Context variable @1 is not found in namespace @2��&���Invalid namespace name @1 passed to @2- 
�����Too many context variableson�����Invalid argument passed to @1@1'��.���BLR syntax error. Identifier @1... is too longNT�����exception @1�����Malformed string��*���Output parameter mismatch for procedure @1TA��.���Unexpected end of command - line @1, column @2ad��6���partner index segment no @1 has incompatible data typeat��L���Invalid length parameter @1 to SUBSTRING. Negative integers are not allowed.��!���CHARACTER SET @1 is not installed����2���COLLATION @1 for CHARACTER SET @2 is not installed�������connection shutdown �����Maximum BLOB size exceeded i��<���Can't have relation with only computed fields or constraints��+���Time precision exceeds allowed range (0-@1) ��7���Unsupported conversion to target type BLOB (subtype @1)a��+���Unsupported conversion to target type ARRAYa��&���Stream does not support record locking����U���Cannot create foreign key constraint @1. Partner index does not exist or is inactive.nva ��W���Transactions count exceeded. Perform backup and restore to make database operable againe!��$���Column has been unexpectedly deleted"�����@1 cannot depend on @2ed#��=���Blob sub_types bigger than 1 (text) are for internal use only���$��H���Procedure @1 is not selectable (it does not contain a SUSPEND statement)%��2���Datatype @1 is not supported for sorting operationd.&�����COLLATION @1'��	���DOMAIN @1lle(�����domain @1 is not defined)��+���Array data type can use up to @1 dimensionss*��?���A multi database transaction cannot span more than @1 databases +�����Bad debug info formatcon,��&���Error while parsing procedure @1's BLR r-�����index key too bigpor.��#���concurrent transaction number is @1 /��,���validation error for variable @1, value "@2"0��#���validation error for @1, value "@2"l1��H���Difference file name should be set explicitly for database on raw device2��7���Login name too long (@1 characters, maximum allowed @2)d3��(���column @1 is not defined in procedure @24�����Invalid SIMILAR TO patternp 5�����Invalid TEB formatse6��0���Found more than one transaction isolation in TPB7��@���Table reservation lock type @1 requires table name before in TPB8��+���Found more than one @1 specification in TPBr9��2���Option @1 requires READ COMMITTED isolation in TPBem:��7���Option @1 is not valid if @2 was used previously in TPB.;��;���Table name length missing after table reservation @1 in TPBf<��B���Table name length @1 is too long after table reservation @2 in TPBta=��I���Table name length @1 without table name after table reservation @2 in TPBcon>��R���Table name length @1 goes beyond the remaining TPB size after table reservation @2re?��;���Table name length is zero after table reservation @1 in TPB1@��O���Table or view @1 not defined in system tables after table reservation @2 in TPB�A��`���Base table or view @1 for view @2 not defined in system tables after table reservation @3 in TPBB��,���Option length missing after option @1 in TPBC��5���Option length @1 without value after option @2 in TPBsolD��C���Option length @1 goes beyond the remaining TPB size after option @2rE��7���Option length is zero after table reservation @1 in TPB�F��7���Option length @1 exceeds the range for option @2 in TPB�G��3���Option value @1 is invalid for the option @2 in TPB�H��R���Preserving previous table reservation @1 for table @2, stronger than new @3 in TPB@1I��V���Table reservation @1 for table @2 already specified and is stronger than new @3 in TPBe J��M���Table reservation reached maximum recursion of @1 when expanding views in TPBiniK��M���Table reservation in TPB cannot be applied to @1 because it's a virtual table reL��L���Table reservation in TPB cannot be applied to @1 because it's a system tableM��X���Table reservation @1 or @2 in TPB cannot be applied to @3 because it's a temporary tableN��`���Cannot set the transaction in read only mode after a table reservation isc_tpb_lock_write in TPBO��f���Cannot take a table reservation isc_tpb_lock_write in TPB because the transaction is in read only mode lP��(���value exceeds the range for a valid timeQ��,���value exceeds the range for valid timestampsR�����string right truncationeS��B���blob truncation when converting to a string: length limit exceededreT�����numeric value is out of rangehanU��B���Firebird shutdown is still in progress after the specified timeoutd V�����Attachment handle is busyBe W��b���Bad written UDF detected: pointer returned in FREE_IT function was not allocated by ib_util_mallocrvX��,���External Data Source provider '@1' not foundY��2���Execute statement error at @1 :
@2Data source : @3 aZ��&���Execute statement preprocess SQL errorrv[�����Statement expected e\�����Parameter name expected�]�� ���Unclosed comment found near '@1'^��A���Execute statement error at @1 :
@2Statement : @3
Data source : @4t t_�����Input parameters mismatchaft`�����Output parameters mismatchk_a��&���Input parameter '@1' have no value setatb��4���BLR stream length @1 exceeds implementation limit @2c�� ���Monitoring table space exhaustedd��,���module name or entrypoint could not be founde�����nothing to cancel��f��U���ib_util library has not been loaded to deallocate memory returned by FREE_IT function exg��6���Cannot have circular dependencies with computed fieldsrdh�����Security database errorai��S���Invalid data type in DATE/TIME/TIMESTAMP addition or subtraction in add_datettime()ej��.���Only a TIME value can be added to a DATE valueock��.���Only a DATE value can be added to a TIME valuerol��D���TIMESTAMP values can be subtracted only from another TIMESTAMP valuem��)���Only one operand can be of type TIMESTAMPrrvn��K���Only HOUR, MINUTE, SECOND and MILLISECOND can be extracted from TIME values�o��I���HOUR, MINUTE, SECOND and MILLISECOND cannot be extracted from DATE values2Stp��D���Invalid argument for EXTRACT() not being of DATE/TIME/TIMESTAMP typeq��H���Arguments for @1 must be integral types or NUMERIC/DECIMAL without scaler��B���First argument for @1 must be integral type or floating point type ts��:���Human readable UUID argument for @1 must be of string type ft��>���Human readable UUID argument for @2 must be of exact length @1oau��P���Human readable UUID argument for @3 must have "-" at position @2 instead of "@1"v��V���Human readable UUID argument for @3 must have hex digit at position @2 instead of "@1"ATw��K���Only HOUR, MINUTE, SECOND and MILLISECOND can be added to TIME values in @1ux��B���Invalid data type in addition of part to DATE/TIME/TIMESTAMP in @1a y��@���Invalid part @1 to be added to a DATE/TIME/TIMESTAMP value in @2z��8���Expected DATE/TIME/TIMESTAMP type in evlDateAdd() result{��D���Expected DATE/TIME/TIMESTAMP type as first and second argument to @1|��P���The result of TIME-<value> in @1 cannot be expressed in YEAR, MONTH, DAY or WEEK}��o���The result of TIME-TIMESTAMP or TIMESTAMP-TIME in @1 cannot be expressed in HOUR, MINUTE, SECOND or MILLISECOND ~��f���The result of DATE-TIME or TIME-DATE in @1 cannot be expressed in HOUR, MINUTE, SECOND and MILLISECOND����V���Invalid part @1 to express the difference between two DATE/TIME/TIMESTAMP values in @2gu€�� ���Argument for @1 must be positive�����Base for @1 must be positive‚��,���Argument #@1 for @2 must be zero or positiveƒ��$���Argument #@1 for @2 must be positive„��2���Base for @1 cannot be zero if exponent is negative��…��C���Base for @1 cannot be negative if exponent is not an integral valueu†��4���The numeric scale must be between -128 and 127 in @1‡��(���Argument for @1 must be zero or positiveˆ��2���Binary UUID argument for @1 must be of string typeAT‰��-���Binary UUID argument for @2 must use @1 bytesxpeŠ��3���Missing required item @1 in service parameter block�‹�����@1 server is shutdownaluŒ�����Invalid connection stringEAR�����Unrecognized events blockesuŽ��5���Could not start first worker thread - shutdown serversed��N���Timeout occurred while waiting for a secondary connection for event processingn ��+���Argument for @1 must be different than zeroM‘��,���Argument for @1 must be in the range [-1, 1]’��1���Argument for @1 must be greater or equal than one��“��,���Argument for @1 must be in the range ]-1, 1[”��5���Incorrect parameters provided to internal function @1or •��/���Floating point overflow in built-in function @1�–��-���Floating point overflow in result from UDF @1e��—��/���Invalid floating point value returned by UDF @1o˜��Y���Database is probably already opened by another engine instance in another Windows sessionfor™��,���No free space found in temporary directoriesš��+���Explicit transaction control is not allowedU›��9���Use of TRUSTED switches in spb_command_line is prohibited���¹��8���Asynchronous call is already running for this attachment'��
���expected typezed'�����bad block type��'�����bad block sizewo'�����corrupt pool'�����bad pool ID�'�����memory exhausted'�����set option not implementedfo'�����show option not implementedt'�����show_fields: dtype not doneM'�����INTERNAL: @1'��"���** QLI error from database "@1" **gu'�����** QLI error from database **tha'�����** QLI error: @1 **r'�����expected @1, encountered "@2"���'�����integer overflow'�����integer division by zero '�����floating overflow trapw !'�����floating division by zeroloa"'�����floating underflow trapr#'�����floating overflow faulta$'�����floating underflow fault%'�����arithmetic exception&'��-���illegal instruction or address, recovering...the''��7���Please retry, supplying an application script file namer('��)���Welcome to QLI
Query Language Interpreterot )'�����qli version @1 T*'�� ���
Statistics for database "@1"
@2+'�����HSH_remove failed���,'�����EVAL_boolean: not finisheddy-'�����EVAL_value: not finished.'��&���data type not supported for arithmetic��/'��*���user name is supported in RSEs temporarilyd 0'�����Input value is too longd1'�����EXEC_execute: not implemented'��2'�����print_blob: expected field node�3'��#���output pipe is not supported on VMSL4'�����could not create pipe da5'��
���fdopen failed���6'�����execution terminated by signal��7'�����field validation errorpe8'��#���Request terminated by statement: @1 9'�����Request terminated by statemento:'�����Cannot open output file "@1";'�����Could not run "@1"er<'�����comparison not donel='�����conversion not implementedfa>'�����conversion not implementedlt?'�����MOVQ_move: conversion not donele@'�� ���BLOB conversion is not supportedA'�����conversion errorB'�����conversion errorC'�����conversion errorD'�����conversion errorE'�����conversion errorF'�����conversion errorG'�� ���BLOB conversion is not supportedH'��$���Error converting string "@1" to dateI'�����overflow during conversiondyJ'�����gds_$put_segment faileddK'�����fseek failedL'�����unterminated quoted string��M'�����could not open scratch fileoN'�����fseek failedO'�����unterminated quoted stringxeP'��+���unexpected end of procedure in procedure @1dQ'��!���unexpected end of file in file @1ppoR'�����unexpected eofulS'�����cannot open command file "@1"ileT'��#���PIC_edit: class not yet implemented�U'�����conversion errorV'�����procedure "@1" is undefinedbW'��*���procedure "@1" is undefined in database @2emX'�����procedure "@1" is undefined Y'��)���Could not create QLI$PROCEDURE_NAME fieldn nZ'��$���Could not create QLI$PROCEDURE field['��%���Could not create QLI$PROCEDURES tableOVQ\'��)���procedure name "@1" in use in database @2on ]'�����database handle required^'��B���QLI$PROCEDURES table must be created with RDO in Rdb/VMS databases e_'��!���procedure name over 31 charactersrsi`'�����	[@1 topics matched @2] a'�����
@1Sub-topics available:b'�����
No help is available for @1 @2�c'��!���
Sub-topics available for @1 are:���d'��8���Procedures can not be renamed across databases. Try COPYe'��%���Procedure @1 not found in database @2h ff'��!���substitute prompt string too longtedg'��!���substitute prompt string too long prh'��%���Procedure @1 not found in database @2d oi'��%���Procedure @1 not found in database @2'��j'�����No security classes definedek'��!���	Security class @1 is not defineded�l'�����	No views defined'��m'�����	No indexes definedin'�����	No indexes definedio'�� ���No databases are currently readyp'��"���Procedure @1 in database "@2" (@3)crq'�����text, length @1 r'�����varying text, length @1es'�����null terminated text, length @1rt'�����short binaryu'�����long binarycv'�����quadw'�����short floating @x'��
���long floatinghany'�����BLOBz'�����, segment length @1e{'�����, subtype @1|'��
���, subtype BLRbas}'��
���, subtype ACL na~'�����date'��
���, scale @1��€'�����, subtype fixed '�����Database "@1" readied as @2�‚'��
���Database "@1"���ƒ'�� ���No databases are currently ready„'��;���    Page size is @1 bytes.  Current allocation is @2 pages.Y…'��&���Field @1 does not exist in database @2 f†'��,���Field @1 does not exist in any open database‡'����� (computed expression)onˆ'��*���There are no forms defined for database @1 o‰'��/���There are no forms defined in any open database�Š'��-���Global field @1 does not exist in database @21 i‹'��3���Global field @1 does not exist in any open databaseeŒ'��+���There are no fields defined for database @1d'��0���There are no fields defined in any open databaseŽ'��%���Procedure @1 not found in database @2���'�����Procedure @1 not found��'��!���Procedures in database "@1" (@2):hor‘'��$���No triggers are defined for table @1’'��&���No triggers are defined in database @1��“'��&���No triggers are defined in database @1su”'��
���Variables:su•'�����    QLI, version "@1" AC–'�� ���    Version(s) for database "@1"—'��&���expand_expression: not yet implementedie˜'��%���expand_statement: not yet implemented���™'��)���variables may not be based on BLOB fields   š'��.���cannot perform assignment to computed field @1.Y›'�����no context for ERASEœ'�����cannot erase from a join'��5���@1.* cannot be used when a single element is requiredprež'��(���"@1" is undefined or used out of contextŸ'�����no default form name '�����No database for form @1d¡'��'���form @1 is not defined in database "@2"i¢'��$���no context for form ACCEPT statement£'��"���field @1 is not defined in form @2er¤'�����no context for modifyata¥'�����field list required for modifyfi¦'�����No items in print list��§'�����No items in print listba¨'�����invalid ORDER BY ordinal©'��;���asterisk expressions require exactly one qualifying contextgª'�����unrecognized context«'��I���field referenced in BASED ON cannot be resolved against readied databasesn d¬'��$���expected statement, encountered "@1"­'��#���Expected PROCEDURE encountered "@1"f®'�����period in qualified name¯'�����no databases are readyie°'�� ���BLOB variables are not supported±'�����end of statement²'�����end of commandld³'�����quoted edit string a´'�����variable definition clause��µ'�����@1 is not a database¶'�� ���@1 is not a table in database @2·'�����variable data typegl¸'��=���no data type may be specified for a variable based on a fieldext¹'�����object type for DEFINE��º'��
���table namer »'�����comma between field definitionsi¼'�����FROM½'�����table or view name f¾'�����[T s¿'�����]'��À'�����No statements issued yetÁ'�����ON or TOÂ'�����quoted edit string��Ã'�����column definition clauseÄ'��.���global fields may not be based on other fieldsn Å'��!���field name or asterisk expressionnalÆ'�����FROM RSE clausesÇ'�����commaexaÈ'�����quoted header segment'��É'�����left parenthesisÊ'��&���comma or terminating right parenthesis rË'�����left parenthesisÌ'�����VALUES list or SELECT clauseÍ'��6���the number of values do not match the number of fields"fÎ'�����value expressionÏ'�����right parenthesissesÐ'��
���quoted stringLOBÑ'��
���ENTREE or END���Ò'��
���quoted stringentÓ'�����index state option��Ô'��
���table nameriÕ'�����ADD, MODIFY, or DROPÖ'�����comma between field definitionse×'��
���identifiera Ø'�����positive number�Ù'�����FORMÚ'�����period in qualified table namee Û'�� ���@1 is not a table in database @2Ü'��$���database file name required on READYÝ'�����EXISTS (SELECT * <sql rse>)iÞ'�����relational operatorMß'�����a database has not been readiedsà'��'���expected "table_name", encountered "@1"�á'��
���table name��â'��	���PROCEDUREg��ã'��
���TOP or BOTTOMtioä'�����report writer SET optionå'�����report itemtæ'��
���set option��ç'�����RELATIONS or TRIGGERSsioè'��
���table nameSEé'��
���database nameexaê'��
���table namedeë'��
���database nameeftì'��
���table name��í'��
���database namerigî'��
���table name��ï'��
���table nameisð'�����FROM clause ñ'�����AVG, MAX, MIN, SUM, or COUNTò'��	���COUNT (*)atcó'�����left parenthesisô'�����OFluõ'�����database handlehö'�����SETi÷'��$���database block not found for removalø'�����show_fields: dtype not doneeù'�����global field @1 already exists��ú'�� ���Cannot define an index in a viewû'�����Index @1 already exists�ü'��$���Column @1 does not occur in table @2ý'�����Table @1 already exists þ'��.���Field @1 is in use in the following relations:��ÿ'��#���Field @1 is in use in database "@2"��(��(���Field @1 is not defined in database "@2"(��(���Index @1 is not defined in database "@2"(�����metadata operation failed, e(�� ���no active database for operation(��5���Interactive metadata updates are not available on Rdb SE(�����global field @1 is not definedt (��&���Index @1 does not exist in database @2��(�����field @1 does not existm(�� ���no active database for operation	(��5���Interactive metadata updates are not available on Rdbabl
(�����Unlicensed for database "@1"(��&���Field @1 already exists in relation @2NT(��#���data type cannot be changed locallys
(�����global field @1 does not exist��(��!���field @1 not found in relation @2���(��0���Data type conflict with existing global field @1(��#���No data type specified for field @1n(�����database info call failedalr(��!���do not understand BLR operator @1cur(��&���Operation unlicensed for database "@1"��(��"���    Security class for database @1la(�����    Database description:e i(�����    Database description:is (�����	File:	@1 starting at page @2nde(�� ���Field @1 in @2 @3 of database @4(�����    Global field @1e(�����    Field description: f(�����    Datatype information:eta(�����    Field is computed from:d(�����    Field validation:s n(�����    Security class @1doe(�����    Query name:	 @1� (�����    Query name:	 @1x!(�����    Edit string:	 @1"(�����    Edit string:	 @1#(�����    Query header:are$(�����Global field @1 in database @2ns%(�����    Field description:el&(�����    Datatype information:2NT'(�����    Field is computed from: ((�����    Field validation:@1 )(�����    Query name:	 @1l*(�����    Edit string:	 @1+(�����    Query header:���,(��2���    @1 is not used in any relations in database @2��-(�����Forms in database @1.(�����Global fields for database @1: f/(�����    Field description:an0(�����        Index @1@2��1(��"���            index @1 is NOT active��2(�����        Index @1@2 d3(�����    Description:4(�����    Security class @1���5(�����    Stored in external file @1il6(��4���OBSOLETE -        An erase trigger is defined for @17(��4���OBSOLETE -        A modify trigger is defined for @18(��3���OBSOLETE -        A store trigger is defined for @1l9(��$���    Security classes for database @1:(��$���OBSOLETE -	Triggers for relation @1:;(��J���OBSOLETE -    Source for the erase trigger is not available.  Trigger BLR:��<(��,���OBSOLETE -    Erase trigger for relation @1:=(��K���OBSOLETE -    Source for the modify trigger is not available.  Trigger BLR: >(��-���OBSOLETE -    Modify trigger for relation @1: fr?(��J���OBSOLETE -    Source for the store trigger is not available.  Trigger BLR:��@(��,���OBSOLETE -    Store trigger for relation @1:A(��'���OBSOLETE -    Triggers for relation @1:bB(��J���OBSOLETE -    Source for the erase trigger is not available.  Trigger BLR:@1C(��,���OBSOLETE -    Erase trigger for relation @1:D(��K���OBSOLETE -    Source for the modify trigger is not available.  Trigger BLR:�E(��-���OBSOLETE -    Modify trigger for relation @1:-  F(��J���OBSOLETE -    Source for the store trigger is not available.  Trigger BLR: iG(��,���OBSOLETE -    Store trigger for relation @1:H(��=���
    View source for relation @1 is not available.  View BLR:(��I(��&���
    Relation @1 is a view defined as:��J(�����Views in database @1:eraK(�����    @1 comprised of : TrL(�����Views in database @1:-  M(�����    @1 comprised of:N(�����BLOBO(�����, segment length @1eP(�����, subtype text aQ(��
���, subtype BLRR: R(��
���, subtype ACL MoS(�����, subtype @1T(�����text, length @1OU(�����varying text, length @1tV(�����null terminated text, length @1rW(�����short binaryX(�����long binary�Y(�����quadword binarytZ(�����short floatingon[(��
���long floating-  \(�����date](��
���, scale @1��^(�����, subtype fixede_(��/���    Global field @1 is used in database @2 as :1`(�����	@1 in relation @2e a(�� ���Field @1 in @2 @3 of database @4b(�����    Global field @1 c(�����    Field description:ggd(�����    Datatype informatione(�����    Field is computed from:�f(�����    Field validation:theg(�����    Query name:	 @1ah(�����    Query name:	 @1�i(�����    Query header:er j(�����    Edit string:	 @1k(�����    Edit string: 	 @1is l(�����@1 Based on field @2 of @3@4m(�� ���@1Base field description for @2:n(��
���END PROCEDUREbaso(��&���Do you want to roll back your updates?��p(��$���gen_descriptor: dtype not recognizedq(�����gen_expression: not understoodler(��"���gen_statement: not yet implementedsus(�����gen_statistical: not understood�t(��"���EDIT argument must be a BLOB field��u(��/���relations from multiple databases in single RSEtv(��"���cannot find database for BLOB edit��w(��'���compile_expression: not yet implementednx(��'���not yet implemented (compile_statement)cy(�����computable: not yet implemented�z(��$���make_descriptor: not yet implemented{(�����missing messaget|(�����lost message}(�����Triggers for relation @1:���~(�����    @1	@2, Sequence @3, @4el(��	���Pre-store(��€(��
���Post-storenf(��
���Pre-modify  ‚(�����Post-modifyrƒ(��	���Pre-eraseiel„(��
���Post-erase��…(�����Activena†(�����Inactive‡(��
���	Description:(��ˆ(�����	Source for the trigger:‰(��7���	Source for the trigger is not available.  Trigger BLR:BŠ(�����No system triggers are defined f‹(�����System Trigger for relation @1OCŒ(��$���	Triggers defined for this relation:(�����Trigger for relation @1:Ž(��
���TOP or BOTTOMzed(��
���sort fieldsi(�����Too many WITHs��‘(��(���	Shadow @1, File: @2 starting at page @3’(�����DATABASE, TABLE, or INDEX(��“(��$���Database filename required in CREATE”(�����FLOAT fr•(�����INDEXata–(��!���Multiple page size specifications���—(��'���GROUP BY not allowed in view definitionn˜(��)���Aggregates not allowed in view definition(��™(�����NULLš(�����ASt ›(�����SELECT��œ(�����=des(�����ONotž(��
���field name��Ÿ(��
���table nameet (�����user name identifier¡(�����GRANTrel¢(�����OPTION��£(�����FROM¤(�����TOe ¥(�����ADD or DROP-¦(�����Dynamic DDL buffer exceeded�§(�����TABLE(��¨(��5���Database handle @1 conflicts with an established name���©(��%���Could not create QLI$PROCEDURES index(��ª(�����Cannot convert from @1 to @2«(��&���Cannot convert "@1" to a numeric value T¬(��$���function @1 not found in database @2­(��>���Incompatible global field @1 already exists in target databasene®(��#���Relation @1 is missing or undefineda¯(��!���matching language string too longort°(�� ���Functions in database "@1" (@2):±(��+���Functions are not supported in database @1.A³(��4���There are no functions defined in any open database.´(��1���Functions are not supported in any open database.pagµ(�����    Function description:���¶(��*���Function @1 is not defined in database @2.��·(��0���Function @1 is not defined in any open database.¸(��'���Function @1 (@2) in database "@3" (@4):�¹(��"���Function @1 in database "@2" (@3):naº(�����    Function library is @1��»(�����    Return argument is��¼(�����    Argument @1 is��½(��,���database file name required on DROP DATABASE¾(�����Unlicensed for database "@1"¿(��!���Could not drop database file "@1"(��À(��&���Operation unlicensed for database "@1"��Á(����� arrayveÂ(��"���memory pool free list is incorrect" Ã(�����block released twiceÄ(��,���released block overlaps following free blockÅ(��(���released block overlaps prior free blockÆ(��C���References to array fields like @1 in relation @2 are not supportedgÇ(��)���Filters are not supported in database @1. "@È(��(���Filter @1 is not defined in database @2.É(��.���Filter @1 is not defined in any open database.anÊ(��/���Filters are not supported in any open database.aË(��2���There are no filters defined in any open database.��Ì(�� ���Filter @1 in database "@2" (@3):Í(�����    Filter library is @1Î(�����    Input sub-type is @1Ï(�����    Output sub-type is @1ataÐ(�����    Filter description:nÑ(�����Filters in database @1 (@2):Ò(�����	Index @1@2@3@4 Ó(��7���simple field reference not allowed in global aggregates�Ô(��*���prompting not allowed in select field listSEÕ(��&���output pipe is not supported on MPE/XLulÖ(��2���could not resolve context for aggregate expressioned×(��!���source relation @1 does not exist���Ø(�����Messages associated with @1:Ù(�����    message @1:  @2eÚ(��<���Connection to database @1 lost.
	Please FINISH the database!Û(�����Unable to create form windowÜ(��'���Do you want to rollback updates for @1?iÝ(��*���functions are not supported in database @1ppÞ(��'���no functions are defined in database @1tß(��(���filters are not supported in database @1à(��&���no filters are defined for database @1s á(��f���Error during two phase commit on database @1.
Roll back all databases or commit databases individually��â(�����Only fields may be subscripted):ã(��1���"@1" is not a field and so may not be subscriptede iä(��8���Data type of field @1 may not be changed to or from BLOBå(�� ���qli: ignoring unknown switch -@1æ(��0���literal string  <MAXSYMLEN> characters or longerç(�����Variable @1lè(�����    Query name:	 @1mé(�����    Edit string:	 @1ê(��!���Variable @1 has not been declaredppoë(�����    Datatype information: reì(�����input line too long í(�����input line too longrî(��
���number > 0t ï(����� (@1)���ð(��$���cannot format unsubscripted array @1ñ(��/���unsuccessful attempt to extend pool beyond 64KBeò(��F���field width (@1) * header segments (@2) greater than 60,000 characterst ó(�����Relation @1 does not exist��ô(�����FORMs not supported õ(�����	Expression index BLR:ct÷(�����Invalid argument for UDFø(�����SINGULAR (SELECT * <sql rse>)datù(�����JOINÿ(��"���Field @1 in view @2 of database @3s �)��&���Field @1 in relation @2 of database @3as)�����YESb)�����NOta)�����Re-enter)�����Enter���)��'���bad kanji found while formatting output�)��
���Subtopic? d )��,���
type <cr> for next topic or <EOF> to stop: )�����unknown data type @1	)��2���    reads = !r writes = !w fetches = !f marks = !m��
)��;���    elapsed = !e cpu = !u system = !s mem = !x buffers = !be)��#���@1 Based on field @2 of relation @3 )�����@1 Based on field @2 of view @3 
)��	���PRECISIONppo)��!���Field scale exceeds allowed range���)��"���Field length exceeds allowed range l)��(���Field length should be greater than zero N�����gdef version @1p!N�����gdef: unknown switch @1l"N�����	legal switches are:#N�����@1@2$N��+���gdef: Database name is required for extract %N�����gdef: cannot open @1&N�����gdef: cannot open @1 or @2��'N�����
@1 errors during input.(N�����
No errors.L)N�����
1 error during input.or*N�����Save changes before exiting?+N�����Ceasing processing because@1,N��
���of errors.ab-N�����you told me to.1.N�����memory exhausted/N�����@1:@2:��0N�����error count exceeds limit (@1)��1N��.���what we have here is a failure to communicate!��2N�����Database "@1" already exists3N�����Do you want to replace it?��4N��)���Database "@1" exists but cannot be opened = 5N�����Could not create database "@1"  6N�� ���    Version(s) for database "@1"7N�� ���    Version(s) for database "@1"8N�����GDEF unlicensed�9N�����Could not locate database@3 :N��!���error committing metadata changesxce;N�����Could not release databasele<N�����Could not delete file @1=N�����Could not attach database "@1"n >N�� ���    Version(s) for database "@1"?N�����GDEF unlicensed�@N��5���database version is too old to modify: use GBAK firstme AN�����no database specified���BN�����action not implemented yetcaCN��#���error rolling back metadata changesnDN��!���error committing metadata changesrorEN��&���field @1 already exists in relation @2itFN�����gds_$database_info failedcauGN��N���Preceding file did not specify length, so @1 must include starting page number��HN��&���error committing new file declarations��IN�����function @1 already existsluJN��"���@1 is a view and cannot be indexedalKN�����table @1 does not exist LN��0���index @1: field @2 does not exist in relation @3MN��8���index @1: field @2 in @3 is computed and cannot be a keyNN��4���combined key length (@1) for index @2 is > 254 bytesON�����index @1 already exists�PN�����error creating index @1sQN�����table @1 already existstRN�� ���security class @1 already existsSN��#���Store trigger already exists for @11TN��$���Modify trigger already exists for @1UN��#���Erase trigger already exists for @1�VN�����table @1 does not existeWN�����table @1 already existsuXN��&���field @1 already exists in relation @2��YN��E���field @1 does not exist in relation @2 as referenced in view field @3esnZN�����gds_$close_blob failedat[N�����gds_$create_blob failedr\N��2���field @1 from relation @2 is referenced in view @3le]N��&���field @1 does not exist in relation @2gt^N�����filter @1 does not exist_N�����function @1 does not exist��`N��E���field @1 is used in relation @2 (local name @3) and cannot be droppeddalaN�����field @1 does not exist bN�����index @1 does not exist cN�����@1 referenced by view @2dN�����cannot drop system relation @1ndeN�����table @1 does not existdfN�� ���security class @1 does not existgN�����shadow @1 does not existhN��#���error committing deletion of shadow�iN�����Trigger @1 does not existecujN��7���Trigger message number @1 for trigger @2 does not existskN��#���Type @1 for field @2 does not existtlN��G���User privilege @1 on field @2 in relation @3
for user @4 does not existxmN��;���User privilege @1 on relation @2 for user @3 does not exist nN��"���field @1 is unknown in relation @2exoN��1���relation @1 is used in trigger @2 but not defined���pN�����TOTAL of date not supported_qN��,���(EXE) make_desc: do not understand node typerN�����field @1 does not exist�sN��7���Unauthorized attempt to change field @1 to or from BLOBotN�����field @1 does not exist uN�����index @1 does not exist�vN�����relation @1 is not externalnwN�����table @1 does not existbxN��6���Invalid attempt to assign trigger @1 to a new relationoeyN�����Trigger @1 does not exist byzN��#���Type @1 for field @2 does not exist {N�����symbol @1 is too long ex|N�����gds_$put_segment failedo}N�����gds_$put_segment failedo~N��0���(EXE) string_length: No defined length for BLOBsN��!���GENERATE_blr: dtype not supported���€N�� ���GENERATE_blr: node not supportedN�����object cannot be resolvedor ‚N�����Global field @1 is not definedriƒN��&���field @1 does not exist in relation @2@4„N�����field @1 does not existi…N�����field @1 cannot be resolved3†N��&���field @1 is not defined in relation @2 r‡N�����global field @1 is not definedd ˆN�����relation @1 is not defined��‰N�����trigger @1 is not definedN��ŠN�����bugcheck‹N�����relation @1 is not defined��ŒN�����context @1 is not defined���N�����Cannot resolve field "@1"eldŽN�����relation @1 is not defined@1N�����no database declaredN�����ceasing processing��‘N��#���expected function, encountered "@1"�’N��#���expected function, encountered "@1"e“N��!���expected number, encountered "@1"noe”N��%���expected table name, encountered "@1"ype•N��%���expected identifier, encountered "@1"l @–N��(���expected quoted string, encountered "@1"—N��!���expected symbol, encountered "@1"EXE˜N��*���GDEF processes only one database at a time��™N��9���only SECURITY_CLASS, DESCRIPTION and CACHE can be droppedt sšN�����PAGE_SIZE cannot be modified›N��#���data type required for global fieldnœN��8���Security class can appear only on local field referencesN��7���database version is too old for the new syntax: filters�žN��&���expected filter name, encountered "@1"��ŸN��$���Filter entry point must be specified N��$���Filter module name must be specified¡N��9���database version is too old for the new syntax: functionsd��¢N��&���Function entry point must be specifiednn£N��&���Function module name must be specified n¤N��-���expected comma or semicolon, encountered "@1"���¥N��8���database version is too old for the new syntax: ASC/DESC¦N��8���database version is too old for the new syntax: ASC/DESC§N��-���expected comma or semicolon, encountered "@1"N��¨N��<���expected STORE, MODIFY, ERASE, END_TRIGGER, encountered "@1"©N�����table @1 already exists�ªN��-���expected comma or semicolon, encountered "@1"ess«N��(���shadow number must be a positive integer¬N��6���database version is too old for the new trigger syntaxGE­N��/���expected STORE, MODIFY, ERASE, encountered "@1"g®N�����message number @1 exceeds 255n a¯N��5���database version is too old for the new syntax: typesis °N��!���expected period, encountered "@1"���±N��/���expected qualified field name, encountered "@1"e²N��!���expected period, encountered "@1"r m³N��*���data type cstring not supported for fieldson´N��,���computed by expression must be parenthesizedµN�����unmatched parenthesisspe¶N��=���expected FROM, COMPUTED, or qualified field, encountered "@1"���·N��7���database version is too old for the new syntax: filtersC¸N��9���database version is too old for the new syntax: functionsN��¹N��?���expected STORE, MODIFY, ERASE, or END_TRIGGER, encountered "@1"OºN��6���database version is too old for the new trigger syntax@1»N��5���database version is too old for the new syntax: typesred¼N��&���gen_trigger_name: invalid trigger typeve½N��7���System flag value of 1 is reserved for system relations ¾N��5���database version is too old for the new syntax: GRANT1"g¿N�����expected ON, encountered "@1"n aÀN��!���GRANT privilege was not specifiedhe ÁN�����expected TO, encountered "@1"perÂN�� ���expected GRANT, encountered "@1"ÃN��!���expected OPTION, encountered "@1"N��ÄN�����global field @1 already exists mÅN��<���expected STORE, MODIFY, ERASE, END_TRIGGER, encountered "@1"ÆN�����Trigger @1 does not existzedÇN��,���expected global field name, encountered "@1"ÈN��*���data type cstring not supported for fieldsedÉN��0���A computed expression cannot be changed or addedÊN��8���Security class can appear only on local field referencesËN��8���database version is too old for the new syntax: ASC/DESCÌN��&���expected DESCRIPTION, encountered "@1"ENÍN��0���A computed expression cannot be changed or addedÎN��'���expected field action, encountered "@1"aÏN��6���database version is too old for the new trigger syntaxn_ÐN��'���expected trigger name, encountered "@1"tÑN��/���Unsuccessful attempt to modify trigger relation�ÒN�����message number @1 exceeds 255he ÓN��7���expected message modification keyword, encountered "@1"�ÔN��5���database version is too old for the new syntax: typesencÕN��0���A computed expression cannot be changed or addedÖN��A���expected drop/modify of field or security class, encountered "@1"dy ×N��,���expected object for DEFINE, encountered "@1"ØN��,���expected object for MODIFY, encountered "@1"ÙN��*���expected object for DROP, encountered "@1"teÚN��"���expected command, encountered "@1"orÛN��5���database version is too old for the new syntax: array���ÜN�����array size must be positivenÝN�� ���expected comma, encountered "@1"ÞN��$���expected semicolon, encountered "@1"ßN��*���data type cstring not supported for fields"@àN��'���expected field clause, encountered "@1"náN��^���expected DESCRIPTION, EDIT_STRING, MISSING VALUE, SECURITY_CLASS or VALID_IF, encountered "@1"e âN��,���COMPUTED BY expression must be parenthesizedãN�����unmatched parenthesiscesäN��+���validation expression must be parenthesizedsåN�����segment length must be positiveeæN��)���expected field sub_type, encountered "@1"1"�çN��)���expected field sub_type, encountered "@1"yntèN�����expected "[", encountered "@1"ioéN��'���character field length must be positiveoêN�����expected "]", encountered "@1"ncëN��5���argument mode by value not allowed for this data typeed ìN��*���argument mode is by value, or by referenced íN��3���return mode must be return_value or return_argument�îN��!���expected number, encountered "@1"N��ïN��:���expected comma between group and user ID, encountered "@1"��ðN��+���expected trailing bracket, encountered "@1"dñN�����no database declaredòN��6���PAGE_SIZE specified (@1) longer than limit of @2 bytesinóN��3���PAGE_SIZE specified (@1) was rounded up to @2 byteseôN��6���Unrecognized privilege "@1" or unrecognized identifierSIõN��6���database version is too old for the new syntax: REVOKE��öN�����expected ON, encountered "@1"hes÷N��"���REVOKE privilege was not specified��øN�����expected FROM, encountered "@1"iùN��/���Attempt change trigger type from STORE to ERASEeúN��0���Attempt change trigger type from MODIFY to STOREûN��0���Attempt change trigger type from MODIFY to ERASEüN��2���Attempt to change trigger type from ERASE to STORE pýN�����valid ifþN��
���missing valueereÿN��	���data typergu�O�����sub typeO�����segment_lengths O��$���@1 is a global, not local, attributeO�����computed fields need data types O��*���subtypes are valid only for BLOBs and textpeO��&���segment length is valid only for BLOBsedO�����global field @1 is not defined��O�����action not implemented yet eO�����action not implemented yete 	O�����action not implemented yetd 
O��*���OVER can only be used in CROSS expressionsIZO�����abort code cannot exceed 255O�����expected =, encountered "@1"
O�����too many decimal pointsiO��(���unrecognized character in numeric stringO��*���expected FROM RSE clause, encountered "@1"edO��5���expected comma or right parenthesis, encountered "@1"xpeO��+���expected left parenthesis, encountered "@1"tO��+���expected value expression, encountered "@1"nO��,���expected right parenthesis, encountered "@1"O�����expected IN, encountered "@1"ASEO��.���expected relational operator, encountered "@1"TOO�����expected OF, encountered "@1"aluO�����action not implemented yetb O�����DDL_ext: cannot open @1�O�� ���    Version(s) for database "@1"O��*���**** unable to decompile missing value ***btO��5���

/*	Security Class Definitions / GRANT statements	*/h iO��>���**** field @1 cannot be extracted, computed source missing ***��O������O�� ���
***gds_$database_info failed***O�� ���

/*	Global Field Definitions	*/ O�����

/*	Filter Definitions	*/an!O�����

/*	Function Definitions	*/"O�����

/*	Relation Definitions	*/#O��.���
/*	Add Security Classes to Defined Objects	*/ec$O�����

/*	Trigger Definitions	*/a%O��'���*****  trigger type not understood ****S&O��:���****  trigger source for trigger @1 must be recreated ****he'O��@���**** store trigger source for relation @1 must be recreated ****(O��A���**** modify trigger source for relation @1 must be recreated ****rig)O��@���**** erase trigger source for relation @1 must be recreated *****O�����

/*	View Definitions	*/+O��.���**** view definition @1 must be recreated ****ed,O�����***** ACL not understood ***** y-O�����gds_$open_blob failedpen.O��&���*****  BLOB option not understood ****��/O�����gds_$get_segment faileds0O�����gds_$close_blob failedec1O��:���database version is too old for the new syntax: generators @2O��)���expected generator name, encountered "@1"���3O�����fseek failed4O�����could not open scratch file�5O�����gds_$put_segment failed/6O����� unterminated quoted stringn7O��
���line too long De8O�����HSH_remove failedRel9O��%���gdef: cannot open DYN output file: @1Cla:O�����action not implemented yet��;O��&���internal error during DYN pretty printgg<O��&���internal error during DYN pretty printge=O��&���internal error during DYN pretty printhe>O������?O��%���inappropriate self-reference of fieldt b@O��"���shadow file must be AUTO or MANUALr AO�����BLR request size limit exceededdBO�����

/*	Generator Definitions	*/urcCO�����

/*	Index Definitions	*/ed DO��9���argument mode of a return_argument must be 'by reference'@1 EO��/���argument mode 'by value' requires a return modedFO��*���unexpected end of file, semicolon missing?**GO�����Functions cannot return arrays.�HO��5���symbol @1 is too long, truncating it to @2 charactersO��IO��D���A node name is not permitted in a shadow, secondary or log file nameJO��@���A non-Decnet node name is not permitted in an external file nameKO��5���A node name is not permitted in an external file nameineLO�����table @1 already existsfMO��)���Array indexes and size cannot be modified: @NO��B���Modify data type of array @1 requires complete field specificationprOO��T���A relation or view may not be defined and then deleted in a single execution of GDEFPO��*���expected message keyword, encountered "@1"-rQO��)���expected trigger action, encountered "@1"UTORO��=���expected end_trigger or description keyword, encountered "@1"ratSO��%���Ceasing processing because of errors.tioTO�����Ceasing processing.dUO�����shadow @1 is inactivee 'VO�����UDF is limited to 10 parametersbWO��:���Set_generator requires write privilege for RDB$GENERATORS.miXO��1���key length (@1) for compound index @2 exceeds 202O��YO��$���expected ON or '(', encountered "@1"ZO�����expected ')', encountered "@1" n[O��$���expected ON or '(', encountered "@1"\O�����expected ')', encountered "@1"��]O��1���expected comma or right bracket, encountered "@1"ern^O��$���expected GENERATOR, encountered "@1"_O�����Unexpected sort clausene`O�����DYN request size limit exceeded�aO��1���error committing new Write-ahead Log declarationsy dbO��8���a node name is not permitted in a shared cache file namecO��%���a shared cache file @1 already exists thdO��2���error committing new shared cache file declarationeseO��#���no shared cache file exists to dropefO��.���error committing deletion of shared cache fileedgO��,���error in getting Write-ahead Log informationhO��"���error in reading list of log fileseriO��=���use CASCADE option to remove log files before archive is doneO��jO��.���Only raw devices support partitioned log filestokO��=���Raw devices not supported in series of log file specification1) lO��<���Partitions not supported in series of log file specificationmO��B���Cannot modify log file specification.  Drop and redefine log files 'nO��#���log partition size too small for @1�oO��8���Total length of the partitioned log @1 must be specifiedpO��&���Minimum log length should be @1 Kbytes��qO��/���Cannot add and drop log file in same statement.erO��,���Only one log configuration can be specified.sO��"���minimum of @1 cache pages required ptO��:���Overflow log specification required for this configuration auO��'���expected comma or ')', encountered "@1"avO�����YESiwO�����NOtixO�����Please respond with YES or NO.s yO��!���Error fetching password from file of1u��&���data base file name (@1) already givenri2u�����invalid switch @1O��3u�����gfix version @1s4u�����incompatible switch combinationi5u�����replay log pathname required6u��)���number of page buffers for cache requirediti7u�����numeric value requiredvi8u�����positive numeric value required 9u��)���number of transactions per sweep requiredin :u��$���transaction number or "all" required;u�����"sync" or "async" required D<u�����"full" or "reserve" required=u�����user name requiredll>u�����password required���?u�����subsystem namef @u�����"wal" required mAu�����number of seconds requiredg Bu��4���numeric value between 0 and 32767 inclusive requiredCu�����must specify type of shutdownoneDu��"���please retry, specifying an option��Eu�����plausible options are:irFu��4���
    qualifiers show the major option in parenthesisGu��$���please retry, giving a database nameHu�����Summary of validation errorsIu��2���	-activate	activate shadow file for database usagefeJu��+���	-attach		shutdown new database attachmentsnKu��,���	-begin_log	begin logging for replay utilityLu�����	-buffers	set page buffers <n>atMu��'���	-commit		commit transaction <tr / all>nNu�����	-cache		shutdown cache managereOu�����	-disable	disable WAL���Pu��&���	-full		validate record fragments (-v)icQu�� ���	-force		force database shutdownRu��%���	-housekeeping	set sweep interval <n>on Su�� ���	-ignore		ignore checksum errorsTu��)���	-kill		kill all unavailable shadow filesequUu�����	-list		show limbo transactions�Vu��+���	-mend		prepare corrupt database for backup�Wu��%���	-no_update	read-only validation (-v)ic Xu��3���	-online		database online <single / multi / normal>eYu��)���	-prompt		prompt for commit/rollback (-l)cifZu�����	-password	default passwordp[u��*���	-quit_log	quit logging for replay utility o\u��*���	-rollback	rollback transaction <tr / all> d]u��!���	-sweep		force garbage collection er^u��(���	-shut		shutdown <full / single / multi>_u��0���	-two_phase	perform automated two-phase recovery`u��$���	-tran		shutdown transaction startupau��-���	-use		use full or reserve space for versionss <bu�����	-user		default user namesaccu��&���	-validate	validate database structuree du��.���	-write		write synchronously or asynchronously		eu�����	-x		set debug on (-fu��"���	-z		print software version numberwngu��$���
	Number of record level errors	: @1hu�� ���	Number of Blob page errors	: @1iu�� ���	Number of data page errors	: @1ju��!���	Number of index page errors	: @1o tku��#���	Number of pointer page errors	: @1�lu��'���	Number of transaction page errors	: @1cmu��$���	Number of database page errors	: @1nu�����bad block typeneou��#���internal block exceeds maximum sizeepu�����corrupt poolqu�����virtual memory exhaustedru�����bad pool iddsu��(���Transaction state @1 not in valid range.tu��(���ATTACH_DATABASE: attempted attach of @1,uu����� failed vu��
��� succeededswwu�����Transaction @1 is in limbo.�xu��,���More limbo transactions than fit.  Try againyu�����Unrecognized info item @1-phzu��9���A commit of transaction @1 will violate two-phase commit.-us{u��D���A rollback of transaction @1 is needed to preserve two-phase commit.|u��4���Transaction @1 has already been partially committed.}u��=���A rollback of this transaction will violate two-phase commit.g o~u��,���Transaction @1 has been partially committed.u��7���A commit is necessary to preserve the two-phase commit. €u��2���Insufficient information is available to determine��u��#���a proper action for transaction @1.�‚u��7���Transaction @1: All subtransactions have been prepared. ƒu��&���Either commit or rollback is possible.ty„u�����unexpected end of inpute…u��*���Commit, rollback, or neither (c, r, or n)?l †u��2���Could not reattach to database for transaction @1.at‡u�����Original path: @1u��ˆu�����Enter a valid path:t‰u�����Attach unsuccessful.Šu��3���failed to reconnect to a transaction in database @1�‹u�����Transaction @1:sŒu�����  Multidatabase transaction:u�����    Host Site: @1-phŽu�����    Transaction @1ctu�����has been prepared.asu�����has been committed.a‘u�����has been rolled back.d t’u�����is not available.it.“u��#���is not found, assumed not prepared.t”u��&���is not found, assumed to be committed.ns•u�����        Remote Site: @1o–u�����        Database Path: @1s b—u��3���  Automated recovery would commit this transaction.e˜u��5���  Automated recovery would rollback this transaction.is ™u��I���Warning: Multidatabase transaction is in inconsistent state for recovery.���šu��>���Transaction @1 was committed, but prior ones were rolled back.��›u��>���Transaction @1 was rolled back, but prior ones were committed.teœu��$���Transaction description item unknownu�����	-mode		read_only or read_writeažu��$���"read_only" or "read_write" requiredŸu��$���	-sql_dialect	set database dialect n u��(���database SQL dialect must be one of '@1'¡u�����dialect number requirede¢u��'���positive or zero numeric value requiredb£u��$���	-trusted	use trusted authentication¤u��)���could not open password file @1, errno @2are¥u��)���could not read password file @1, errno @2rol¦u�����empty password file @1il§u��)���	-fetch_password fetch_password from filed.t¨u�� ���usage: gfix [options] <database>r�1���Cannot SELECT RDB$DB_KEY from a stored procedure.atas�k���Precision 10 to 18 changed from DOUBLE PRECISION in SQL dialect 1 to 64-bit scaled integer in SQL dialect 3bt�N���Use of @1 expression that returns different results in dialect 1 and dialect 3��u�A���Database SQL dialect @1 does not support reference to @2 datatypeu��v�����w�R���DB dialect @1 and client dialect @2 conflict with respect to numeric precision @3.n x�>���WARNING: Numeric literal @1 is interpreted as a floating-point" y�G���value in SQL dialect 1, but as an exact numeric value in SQL dialect 3.az�K���WARNING: NUMERIC and DECIMAL fields with precision 10 or greater are storede{�D���as approximate floating-point values in SQL dialect 1, but as 64-bit|����integers in SQL dialect 3.le}�&���Ambiguous field name between @1 and @2d ~�>���External function should have return position between 1 and @1ss� ���Label @1 @2 in the current scope€�/���Datatypes @1are not comparable in expression @2D� ���Empty cursor name is not allowed‚�*���Statement already has a cursor @1 assignedONƒ�-���Cursor @1 is not found in the current contextlec„�/���Cursor @1 already exists in the current context …�%���Relation @1 is ambiguous in cursor @2���†�%���Relation @1 is not found in cursor @2ort‡����Cursor is not open��ˆ�L���Data type @1 is not supported for EXTERNAL TABLES. Relation '@2', field '@3'‰�5���Feature not supported on ODS version older than @1.@2retŠ� ���Primary key required on table @1‹�B���UPDATE OR INSERT field list does not match primary key of table @1RNŒ�:���UPDATE OR INSERT field list does not match MATCHING clauseto�[���UPDATE OR INSERT without MATCHING could not be used with views based on more than one table Ž����Incompatible trigger type fi�&���Database trigger type can't be changedun8� ���ODS version not supported by DYN‚8����unsupported DYN verbƒ8�!���STORE RDB$FIELD_DIMENSIONS failed @1„8����unsupported DYN verb…8����@1�†8����unsupported DYN verb‡8����DEFINE BLOB FILTER failed haˆ8����DEFINE GENERATOR failed�‰8�$���DEFINE GENERATOR unexpected DYN verbŠ8����DEFINE FUNCTION failedex‹8����unsupported DYN verbŒ8����DEFINE FUNCTION ARGUMENT faileds8����STORE RDB$FIELDS failed�Ž8����No table specified for index8����STORE RDB$INDEX_SEGMENTS failed�8����unsupported DYN verb‘8� ���PRIMARY KEY column lookup failed’8�R���could not find UNIQUE or PRIMARY KEY constraint in table @1 with specified columnsim“8����PRIMARY KEY lookup failed���”8�6���could not find PRIMARY KEY index in specified table @1e •8����STORE RDB$INDICES failed–8����STORE RDB$FIELDS failed —8� ���STORE RDB$RELATION_FIELDS failed˜8����STORE RDB$RELATIONS failedie™8�1���STORE RDB$USER_PRIVILEGES failed defining a tablegerš8����unsupported DYN verb›8����STORE RDB$RELATIONS failed��œ8����STORE RDB$FIELDS failedN8� ���STORE RDB$RELATION_FIELDS failedž8����unsupported DYN verbŸ8����DEFINE TRIGGER failederb 8����unsupported DYN verb¡8����DEFINE TRIGGER MESSAGE failedR f¢8����STORE RDB$VIEW_RELATIONS failed�£8����ERASE RDB$FIELDS failedc¤8����ERASE BLOB FILTER failed¥8����BLOB Filter @1 not found¦8����unsupported DYN verb§8�#���ERASE RDB$FUNCTION_ARGUMENTS failed�¨8����ERASE RDB$FUNCTIONS failedex©8����Function @1 not foundNTSª8����unsupported DYN verb«8�C���Domain @1 is used in table @2 (local name @3) and cannot be droppedU¬8����ERASE RDB$FIELDS failedt­8����ERASE RDB$FIELDS failedm®8����Column not found¯8����ERASE RDB$INDICES failed°8����Index not found ±8����ERASE RDB$INDEX_SEGMENTS failedN²8����No segments found for indexS³8����No table specified in ERASE RFRD´8�0���Column @1 from table @2 is referenced in view @3µ8� ���ERASE RDB$RELATION_FIELDS failed¶8����View @1 not founded ·8����Column not found for tableS ¸8����ERASE RDB$INDEX_SEGMENTS failedN¹8����ERASE RDB$INDICES failedº8� ���ERASE RDB$RELATION_FIELDS failed»8����ERASE RDB$VIEW_RELATIONS failedu¼8����ERASE RDB$RELATIONS failedGG½8����Table not found�¾8� ���ERASE RDB$USER_PRIVILEGES failed¿8����ERASE RDB$FILES failed�À8����unsupported DYN verbÁ8�!���ERASE RDB$TRIGGER_MESSAGES failednsuÂ8����ERASE RDB$TRIGGERS failed$FUÃ8����Trigger not found���Ä8� ���MODIFY RDB$VIEW_RELATIONS failedÅ8����unsupported DYN verbÆ8����TRIGGER NAME expected8�Ç8����ERASE TRIGGER MESSAGE failedÈ8����Trigger Message not foundedUÉ8����unsupported DYN verbÊ8�!���ERASE RDB$SECURITY_CLASSES failed���Ë8����Security class not foundÌ8����unsupported DYN verbÍ8�*���SELECT RDB$USER_PRIVILEGES failed in grantdNÎ8�*���SELECT RDB$USER_PRIVILEGES failed in grantleÏ8�)���STORE RDB$USER_PRIVILEGES failed in grantbleÐ8�0���Specified domain or source column does not existÑ8� ���Generation of column name failedÒ8����Generation of index name failed�Ó8�!���Generation of trigger name failed���Ô8����MODIFY DATABASE failed��Õ8� ���MODIFY RDB$CHARACTER_SETS failedÖ8����MODIFY RDB$COLLATIONS failed×8����MODIFY RDB$FIELDS failedØ8����MODIFY RDB$BLOB_FILTERS failedRDÙ8����Domain not foundÚ8����unsupported DYN verbÛ8����MODIFY RDB$INDICES failed8�Ü8����MODIFY RDB$FUNCTIONS failedeÝ8����Index column not found fÞ8����MODIFY RDB$GENERATORS failedß8�!���MODIFY RDB$RELATION_FIELDS failed8�à8����Local column @1 not foundRIGá8����add EXTERNAL FILE not allowedGGEâ8����drop EXTERNAL FILE not allowede ã8����MODIFY RDB$RELATIONS failed ä8�&���MODIFY RDB$PROCEDURE_PARAMETERS failed��å8����Table column not foundndæ8����MODIFY TRIGGER failed8�ç8����TRIGGER NAME expectedS fè8����unsupported DYN verbé8����MODIFY TRIGGER MESSAGE failedtleê8����Create metadata BLOB failedaë8����Write metadata BLOB faileddoì8����Close metadata BLOB failedstí8�1���Triggers created automatically cannot be modifiedn oî8����unsupported DYN verbï8�-���ERASE RDB$USER_PRIVILEGES failed in revoke(1)TABð8�1���Access to RDB$USER_PRIVILEGES failed in revoke(2)���ñ8�.���ERASE RDB$USER_PRIVILEGES failed in revoke (3)faò8�2���Access to RDB$USER_PRIVILEGES failed in revoke (4) nó8����CREATE VIEW failedd ô8�)��� attempt to index BLOB column in INDEX @1���õ8�*��� attempt to index array column in index @1otö8����key size too big for index @1���÷8����no keys for index @1ø8����Unknown columns in index @1nù8�%���STORE RDB$RELATION_CONSTRAINTS failed alú8�"���STORE RDB$CHECK_CONSTRAINTS failedowû8�X���Column: @1 not defined as NOT NULL - cannot be used in PRIMARY KEY constraint definitionü8�=���A column name is repeated in the definition of constraint: @1ER ý8�"���Integrity Constraint lookup failedrbþ8�c���Same set of columns cannot be used in more than one PRIMARY KEY and/or UNIQUE constraint definitionlÿ8� ���STORE RDB$REF_CONSTRAINTS failed�9�'���No table specified in delete_constrainte9�%���ERASE RDB$RELATION_CONSTRAINTS failed���9����CONSTRAINT @1 does not exist.evo9�$���Generation of constraint name failed9����Table @1 already exists�9�G���Number of referencing columns do not equal number of referenced columnsI9����STORE RDB$PROCEDURES failed�9����Procedure @1 already existst9�%���STORE RDB$PROCEDURE_PARAMETERS failedatt	9�!���Store into system table @1 failed8�
9�%���ERASE RDB$PROCEDURE_PARAMETERS failed���9����ERASE RDB$PROCEDURES failed�9����Procedure @1 not found�
9����MODIFY RDB$PROCEDURES failed9����DEFINE EXCEPTION failed_9����ERASE EXCEPTION failedlu9����Exception not foundU9����MODIFY EXCEPTION failedK9�&���Parameter @1 in procedure @2 not foundis9����Trigger @1 not found9�<���Only one data type change to the domain @1 allowed at a time9�;���Only one data type change to the field @1 allowed at a time 9����STORE RDB$FILES failedit9����Character set @1 not foundNT9����Collation @1 not foundfi9����ERASE RDB$LOG_FILES failedAS9����STORE RDB$LOG_FILES failed��9����Role @1 not founds n9����Difference file lookup failedstr9����DEFINE SHADOW failed9����MODIFY RDB$ROLES failedb9�%���Name longer than database column size of 9�*���"Only one constraint allowed for a domain"ai"9�!���Looking up column position failed9�#9�E���A node name is not permitted in a table with external file definition1 f$9����Shadow lookup failed%9����Shadow @1 already exists&9�A���Cannot add file with the same name as the database or added files9�'9�>���no grant option for privilege @1 on column @2 of table/view @3ce(9�C���no grant option for privilege @1 on column @2 of base table/view @3c)9�A���no grant option for privilege @1 on table/view @2 (for column @3)e c*9�F���no grant option for privilege @1 on base table/view @2 (for column @3)he+9�B���no @1 privilege with grant option on table/view @2 (for column @3)te,9�G���no @1 privilege with grant option on base table/view @2 (for column @3) -9�1���no grant option for privilege @1 on table/view @2@1 .9�2���no @1 privilege with grant option on table/view @2��/9����table/view @1 does not exist09�)���column @1 does not exist in table/view @2 co19����Can not alter a view29�1���EXTERNAL FILE table not supported in this contextlum39�/���attempt to index COMPUTED BY column in INDEX @1d49����Table Name lookup failed59����attempt to index a view�69�$���SELECT RDB$RELATIONS failed in grant79�*���SELECT RDB$RELATION_FIELDS failed in grantad89�3���SELECT RDB$RELATIONS/RDB$OWNER_NAME failed in grantu99�*���SELECT RDB$USER_PRIVILEGES failed in grantr :9�A���SELECT RDB$VIEW_RELATIONS/RDB$RELATION_FIELDS/... failed in grantor ;9�1���column @1 from table @2 is referenced in index @3o g<9����SQL role @1 does not existse=9�0���user @1 has no grant admin option on SQL role @2>9�&���user @1 is not a member of SQL role @2 @?9�"���@1 is not the owner of SQL role @2io@9����@1 is a SQL role and not a user A9�+���user name @1 could not be used for SQL roleiB9����SQL role @1 already existsthC9�-���keyword @1 can not be used as a SQL role name doD9�t���SQL roles are not supported in on older versions of the database.  A backup and restore of the database is required.L9�G���Cannot rename domain @1 to @2.  A domain with that name already exists.XM9�S���Cannot rename column @1 to @2.  A column with that name already exists in table @3.�N9�+���Column @1 from table @2 is referenced in @3�O9�d���Cannot change datatype for column @1.  Changing datatype is not supported for BLOB or ARRAY columns.P9�@���New size specified for column @1 must be at least @2 characters.Q9�T���Cannot change datatype for @1.  Conversion from base type @2 to @3 is not supported.R9�S���Cannot change datatype for column @1 from a character type to a non-character type.oS9�3���unable to allocate memory from the operating systemrT9�'���Zero length identifiers are not allowed U9����ERASE RDB$GENERATORS failedtV9����Generator @1 not foundouW9����Difference file is not definedL X9�"���Difference file is already defined cY9�/���Database is already in the physical backup moderZ9�+���Database is not in the physical backup modee[9����DEFINE COLLATION failedd\9�q���CREATE COLLATION statement is not supported in older versions of the database.  A backup and restore is required. co]9�7���Maximum number of collations per character set exceeded�^9����Invalid collation attributes_9�/���Collation @1 not installed for character set @2m`9�:���Cannot use the internal domain @1 as new type for field @2s.a9�7���Default value is not allowed for array type in field @1ab9�8���Default value is not allowed for array type in domain @1c9�&���DYN_UTIL_is_array failed for domain @1nnd9�)���DYN_UTIL_copy_domain failed for domain @1 tye9�&���Local column @1 doesn't have a defaultalf9�,���Local column @1 default belongs to domain @2g9����File name is invalidh9����@1 cannot reference @2RAi9�7���Local column @1 is computed, cannot set a default valuefj9����ERASE RDB$COLLATIONS failednk9�F���Collation @1 is used in table @2 (field name @3) and cannot be dropped ml9�7���Collation @1 is used in domain @2 and cannot be dropped�m9����Cannot delete system collation Cn9�3���Cannot delete default collation of CHARACTER SET @1eo9�K���Domain @1 is used in procedure @2 (parameter name @3) and cannot be dropped�p9�)���Field @1 cannot be used twice in index @2tioq9����Table @1 not foundrar9�1���attempt to reference a view (@1) in a foreign keynews9�N���Collation @1 is used in procedure @2 (parameter name @3) and cannot be dropped�t9�5���New scale specified for column @1 must be at most @2.9�u9�:���New precision specified for column @1 must be at least @2.dov9�$���@1 is not grantor of @2 on @3 to @4.w9�'���Warning: @1 on @2 is not granted to @3.ox9�*���Feature '@1' is not supported in ODS @2.@3amy9�,���Cannot add or remove COMPUTED from column @1z9�#���Password should not be empty stringe{9����Index @1 already existsO|9�3���Only @1 or database owner can use GRANTED BY clausei}9����Exception @1 already existsm~9����Generator @1 already existsa9�5���ERASE RDB$USER_PRIVILEGES failed in REVOKE ALL ON ALLati°­����This is a modified text messaget³­����This is a test message��ÀÔ�*���could not locate appropriate error message@3ÁÔ����found unknown switchÂÔ����page size parameter missing�ÃÔ�9���Page size specified (@1) greater than limit (16384 bytes) @1ÄÔ�-���redirect location for output is not specifiedin ÅÔ�'���conflicting switches for backup/restore ÆÔ����device type @1 not knownÇÔ����protection is not there yet ÈÔ�.���page size is allowed only on restore or create�ÉÔ�*���multiple sources or destinations specifiedatÊÔ�(���requires both input and output filenamesËÔ�1���input and output have the same name.  Disallowed.9�ÌÔ�$���expected page size, encountered "@1"ÍÔ�6���REPLACE specified, but the first file @1 is a database��ÎÔ�?���database @1 already exists.  To replace it, use the -REP switch�ÏÔ����device type not specified usÐÔ�,���cannot create APOLLO tape descriptor file @1ÑÔ�2���cannot set APOLLO tape descriptor attribute for @1USÒÔ�1���cannot create APOLLO cartridge descriptor file @1is ÓÔ�+���cannot close APOLLO tape descriptor file @1aÔÔ����gds_$blob_info failedappÕÔ�#���do not understand BLOB INFO item @1wÖÔ����gds_$get_segment failed�×Ô����gds_$close_blob failed1)ØÔ����gds_$open_blob failedtesÙÔ����Failed in put_blr_gen_idÚÔ����data type @1 not understood�ÛÔ����gds_$compile_request failedtÜÔ����gds_$start_request failedownÝÔ����gds_$receive failedhÞÔ����gds_$release_request faileddßÔ����gds_$database_info failed���àÔ�$���Expected database description recordáÔ����failed to create database @1âÔ�#���RESTORE: decompression length errorhãÔ����cannot find table @1äÔ����Cannot find column for BLOBeåÔ����gds_$create_blob failedeæÔ����gds_$put_segment failedaçÔ����expected record lengthreèÔ�/���wrong length record, expected @1 encountered @2�éÔ����expected data attribute�êÔ����Failed in store_blr_gen_idriëÔ����do not recognize record type @1aìÔ�'���Expected backup version 1..9.  Found @1cíÔ�"���expected backup description records îÔ����string truncatedïÔ�'���warning -- record could not be restorednðÔ����gds_$send failedñÔ����no table name for data1wòÔ�%���unexpected end of file on backup file���óÔ�+���database format @1 is too old to restore tolôÔ�(���array dimension for column @1 is invalidõÔ�5���expected array version number @1 but instead found @2faiöÔ�0���expected array dimension @1 but instead found @2÷Ô����Expected XDR record lengtheqøÔ�)���Unexpected I/O error while @1 backup fileÔ�ùÔ�#���adding file @1, starting at page @2�úÔ����array crûÔ����backup@1üÔ�/���	@1B(ACKUP_DATABASE)    backup database to filenýÔ����		backup file is compressed þÔ�D���	@1D(EVICE)             backup file device type on APOLLO (CT or MT)ÿÔ�7���	@1M(ETA_DATA)          backup or restore metadata only,�Õ����blobÕ����cannot open backup file @1atÕ�+���cannot open status and error output file @1�Õ�'���closing file, committing, and finishingeÕ����    committing metadatadÕ����commit failed on table @1iptÕ����committing secondary filesedÕ����creating index @1 coÕ����committing data for table @1	Õ�B���	@1C(REATE_DATABASE)    create database from backup file (restore)��
Õ�'���created database @1, page_size @2 byteseÕ����creating file @1Õ����creating indexes
Õ�(���database @1 has a page size of @2 bytes.Õ�9���	@1I(NACTIVE)           deactivate indexes during restoread Õ�#���do not understand BLOB INFO item @1qÕ�.���do not recognize @1 attribute @2 -- continuing�Õ�,���error accessing BLOB column @1 -- continuingÕ�'���Exiting before completion due to errors)Õ�'���Exiting before completion due to errorslÕ����columnd Õ����fileÕ����file length Õ����filterviÕ�"���finishing, closing, and going homeTAÕ����functionÕ����function argumenta oÕ����gbak version @1�Õ����domainckÕ����indexÕ�Õ����trigger @1 is invalidrorÕ����legal switches are:s Õ�<���length given for initial file (@1) is less than minimum (@2)!Õ�+���	@1E(XPAND)             no data compressioni"Õ�4���	@1L(IMBO)              ignore transactions in limbo#Õ�3���	@1O(NE_AT_A_TIME)      restore one table at a timea$Õ����opened file @1��%Õ�2���	@1P(AGE_SIZE)          override default page sizeea&Õ�	���page size���'Õ�5���page size specified (@1 bytes) rounded up to @2 byteses.(Õ�,���	@1Z                    print version number)Õ�	���privilegeÕ�*Õ����     @1 records ignored +Õ����   @1 records restoredze,Õ����@1 records writtenui-Õ�?���	@1Y  <path>            redirect/suppress status message output .Õ�9���Reducing the database page size from @1 bytes to @2 bytes du/Õ����tableÕ�0Õ�C���	@1REP(LACE_DATABASE)   replace database from backup file (restore)n1Õ�0���	@1V(ERIFY)             report each action taken2Õ�%���restore failed for record in table @1���3Õ����    restoring column @1�4Õ����    restoring file @1���5Õ����    restoring filter @1g6Õ����restoring function @1) i7Õ�&���    restoring argument for function @1  8Õ�"���     restoring gen id value of: @1MB9Õ����restoring domain @1s:Õ����    restoring index @1E_;Õ�#���    restoring privilege for user @1a<Õ����restoring data for table @1�=Õ����restoring security class @1r>Õ����    restoring trigger @1?Õ�$���    restoring trigger message for @1@Õ�#���    restoring type @1 for column @2ZAÕ����started transactioneBÕ����starting transactionCÕ����security classcoDÕ�=���switches can be abbreviated to the unparenthesized charactersnuiEÕ�*���transportable backup -- data in XDR formatstFÕ����triggertGÕ����trigger messageeHÕ����trigger typeIÕ����unknown switch "@1"uJÕ�&���validation error on column in table @1  KÕ� ���    Version(s) for database "@1"LÕ����viewMÕ�$���    writing argument for function @1NÕ����    writing data for table @1 inOÕ����     writing gen id of: @1coPÕ����         writing column @1 @QÕ����    writing filter @1terRÕ����writing filtersuSÕ����    writing function @1nTÕ����writing functions1  UÕ����    writing domain @1 vaVÕ����writing domainstWÕ����    writing index @1XÕ�!���    writing privilege for user @1 prYÕ����    writing table @1ZÕ����writing tables��[Õ����    writing security class @1Õ�\Õ����    writing trigger @1�]Õ�"���    writing trigger message for @1�^Õ����writing trigger messages_Õ����writing triggers`Õ�!���    writing type @1 for column @2Õ�aÕ�
���writing typesÕ�bÕ����writing shadow filescÕ����    writing shadow file @1erdÕ����writing id generatorskupeÕ�!���    writing generator @1 value @2Õ�fÕ����readied database @1 for backuppegÕ����restoring table @1"uhÕ����typeiÕ����gbak:on jÕ� ���committing metadata for table @1kÕ�&���error committing metadata for table @1itlÕ�8���	@1K(ILL)               restore without creating shadowsmÕ����cannot commit index @1d nÕ����cannot commit filesioÕ�B���	@1T(RANSPORTABLE)      transportable backup -- data in XDR format�pÕ�9���closing file, committing, and finishing. @1 bytes written   qÕ�2���	@1G(ARBAGE_COLLECT)    inhibit garbage collectionitrÕ�,���	@1IG(NORE)             ignore bad checksumssÕ�2���	column @1 used in index @2 seems to have vanished��tÕ�>���index @1 omitted because @2 of the expected @3 keys were found�uÕ�'���	@1FA(CTOR)             blocking factor�vÕ�!���blocking factor parameter missingng wÕ�*���expected blocking factor, encountered "@1"�xÕ�?���a blocking factor may not be used in conjunction with device CT yÕ� ���restoring generator @1 value: @2zÕ�<���	@1OL(D_DESCRIPTIONS)   save old style metadata descriptions{Õ�C���	@1N(O_VALIDITY)        do not restore database validity conditionsk|Õ����user name parameter missing }Õ����password parameter missinget~Õ�)���	@1PAS(SWORD)           Firebird password   Õ�*���	@1USER                 Firebird user namemi€Õ����writing stored procedures fiÕ����writing stored procedure @1 ‚Õ�)���writing parameter @1 for stored procedure���ƒÕ����restoring stored procedure @1ng.„Õ�+���restoring parameter @1 for stored procedure …Õ����writing exceptionsit†Õ����writing exception @1‡Õ����restoring exception @1��ˆÕ�8��� missing parameter for the number of bytes to be skipped‰Õ�8���expected number of bytes to be skipped, encountered "@1"ŠÕ�7���adjusting an invalid decompression length from @1 to @2�‹Õ�1���skipped @1 bytes after reading a bad attribute @2kinŒÕ�C���	@1S(KIP_BAD_DATA)      skip number of bytes after reading bad datanÕ�K���skipped @1 bytes looking for next valid attribute, encountered attribute @2CŽÕ����writing table constraintsta Õ����writing constraint @1LIDÕ����table constraint‘Õ����writing referential constraints�’Õ����writing check constraints���“Õ����writing character sets�”Õ����writing collations  •Õ�
���character setÕ�–Õ����writing character set @1—Õ�	���collationÕ�˜Õ����writing collation @1œÕ�3���Unexpected I/O error while reading from backup fileaÕ�1���Unexpected I/O error while writing to backup fileprožÕ����

Could not open file name "@1" ŸÕ����

Could not write to file "@1"g  Õ����

Could not read from file "@1"1¡Õ����Done with volume #@1, "@2"��¢Õ�c���	Press return to reopen that file, or type a new
	name followed by return to open a different file.l£Õ�'���Type a file name to open and hit returnt¤Õ����  Name: ¥Õ����

ERROR: Backup incompleteAD¦Õ�'���Expected backup start time @1, found @2b§Õ�%���Expected backup database @1, found @2nex¨Õ�*���Expected volume number @1, found volume @2��©Õ�5���could not drop database @1 (database might be in use)Õ�ªÕ�$���Skipped bad security class entry: @1«Õ�%���Unknown V3 SUB_TYPE: @1 in FIELD: @2.int¬Õ�E���Converted V3 sub_type: @1 to character_set_id: @2 and collate_id: @3.cte­Õ�B���Converted V3 scale: @1 to character_set_id: @2 and callate_id: @3.g ®Õ����System memory exhaustedI¯Õ�<���	@1NT                   Non-Transportable backup file format°Õ�&���Index "@1" failed to activate because:d ±Õ�1���  The unique index has duplicate values or NULLs. "@²Õ�E���  Delete or Update duplicate values or NULLs, and activate index with"�³Õ����  ALTER INDEX "@1" ACTIVE;��´Õ�=���  Not enough disk space to create the sort file for an index.ed µÕ�v���  Set the TMP environment variable to a directory on a filesystem that does have enough space, and activate index withco¶Õ�F���Database is not online due to failure to activate one or more indices.p ·Õ�A���Run gfix -online to bring database online without active indices.2��¸Õ����writing SQL rolestab¹Õ����    writing SQL role: @1ºÕ����SQL role»Õ����    restoring SQL role: @1�¼Õ�0���        @1RO(LE)               Firebird SQL role½Õ����SQL role parameter missing_s¾Õ�>���        @1CO(NVERT)            backup external files as tablesac¿Õ����gbak: WARNING:laÀÕ����gbak: ERROR:ÁÕ�5���	@1BU(FFERS)            override page buffers defaultranÂÕ����page buffers parameter missingdeÃÕ�'���expected page buffers, encountered "@1"hÄÕ�1���page buffers is allowed only on restore or create DeÅÕ����Starting with volume #@1, "@2"LsÆÕ�:���size specification either missing or incorrect for file @1��ÇÕ����file @1 out of sequence ÈÕ�&���can't join -- one of the files missing��ÉÕ�:��� standard input is not supported when using join operationthÊÕ�;���standard output is not supported when using split operationeËÕ����backup file @1 might be corrupttÌÕ�#���database file specification missingnÍÕ�&���can't write a header record to file @1ndÎÕ����free disk space exhaustedtabÏÕ�6���file size given (@1) is less than minimum allowed (@2)stÐÕ�g���Warning -- free disk space exhausted for file @1, the rest of the bytes (@2) will be written to file @3sÑÕ����service name parameter missing bÒÕ�W���Cannot restore over current database, must be SYSDBA or owner of the existing database.)ÓÕ�����ÔÕ�@���	@1USE_(ALL_SPACE)      do not reserve space for record versionsÕÕ�3���        @1SE(RVICE)            use services manager�ÖÕ�:���	@1MO(DE) <access>      "read_only" or "read_write" accessng×Õ�$���"read_only" or "read_write" requiredØÕ�$���setting database to read-only accessÙÕ�%���just data ignore all constraints etc. joÚÕ�N���restoring data only ignoring foreign key, unique, not null & other constraintsinÛÕ�9���closing file, committing, and finishing. @1 bytes writtenpliÜÕ�s���	@1R(ECREATE_DATABASE) [O(VERWRITE)] create (or replace if OVERWRITE used)\n				database from backup file (restore)rÝÕ�-���    activating and creating deferred index @1tabÞÕ����check constraintßÕ�	���exception miàÕ����array dimensionsáÕ�	���generatoree âÕ�	���proceduretedãÕ����procedure parameterhäÕ����referential constrainto åÕ����type (in RDB$TYPES)eæÕ�4���	@1NOD(BTRIGGERS)       do not run database triggersçÕ�2���	@1TRU(STED)            use trusted authentication�èÕ����writing names mapping)  éÕ����    writing map for @1ecêÕ����    restoring map for @1ëÕ����name mappingìÕ� ���cannot restore arbitrary mappingíÕ����restoring names mappingdîÕ�6���	@1FIX_FSS_D(ATA)       fix malformed UNICODE_FSS data�ïÕ�:���	@1FIX_FSS_M(ETADATA)   fix malformed UNICODE_FSS metadata��ðÕ����Character set parameter missingsñÕ����Character set @1 not foundy òÕ�7���        @1FE(TCH_PASSWORD)     fetch password from file�óÕ����too many passwords providediôÕ�)���could not open password file @1, errno @2DATõÕ�)���could not read password file @1, errno @2ITEöÕ����empty password file @1up÷Õ�3���Attribute @1 was already processed for exception @2døÕ�I���Skipping attribute @1 because the message already exists for exception @2Õ�ùÕ�[���Trying to recover from unexpected attribute @1 due to wrong message length for exception @2�úÕ�>���Attribute not specified for storing text bigger than 255 bytesabûÕ�,���Unable to store text bigger than 65536 bytesüÕ�+���Failed while fixing the security class name ýÕ����Usage:itþÕ�E���     gbak -b <db set> <backup set> [backup options] [general options]annÿÕ�F���     gbak -c <backup set> <db set> [restore options] [general options]_D�Ö�C���     <db set> = <database> | <db1 size1>...<dbN> (size in db pages)�Ö�M���     <backup set> = <backup> | <bk1 size1>...<bkN> (size in bytes = n[K|M|G])   Ö�?���     -recreate overwrite and -replace can be used instead of -csÖ����backup options are:lÖ����restore options are:Ö����general options are:Ö�8���Invalid metadata detected. Use -FIX_FSS_METADATA option.Ö�0���Invalid data detected. Use -FIX_FSS_DATA option.Ñû����Firebird errorngü����Rollback not performedagü����Connection errorü����Connection not establishedveü�!���Connection authorization failure.ng 'ü����deadlock(ü�*���Unsuccessful execution caused by deadlock.r )ü�,���record from transaction @1 is stuck in limbo+ü����operation completed with errors�.ü�$���the SQL statement cannot be executed0ü�9���Unsuccessful execution caused by an unavailable resource.ack2ü�l���Unsuccessful execution caused by a system error that precludes successful execution of subsequent statements3ü�r���Unsuccessful execution caused by system error that does not preclude successful execution of subsequent statementsndnü����Wrong numeric typeeaoü����too many versionstiopü����intermediate journal file full�qü����journal file wrong formatnvarü�"���database @1 shutdown in @2 secondsTAsü����restart shared cache managertü����exception @1uü����bad checksumvü�!���refresh range number @1 not founddagwü�#���expression evaluation not supportednxü�3���FOREIGN KEY column count does not match PRIMARY KEY yü�9���Attempt to define a second PRIMARY KEY for the same table.r zü����column used with aggregate i{ü����invalid column reference|ü����invalid key position}ü�$���invalid direction for find operation~ü����Invalid statement handleü����invalid lock handlee€ü����invalid lock level @1utiü����invalid bookmark handlet„ü����wrong or obsolete versionf s‡ü�u���The INSERT, UPDATE, DELETE, DDL or authorization statement cannot be executed because the transaction is inquiry only���ˆü�,���external file could not be opened for outputü�!���multiple rows in singleton selecttioŽü�2���No subqueries permitted for VIEW WITH CHECK OPTION�ü�B���DISTINCT, GROUP or HAVING not permitted for VIEW WITH CHECK OPTIONurü�1���Only one table allowed for VIEW WITH CHECK OPTION2 s‘ü�*���No WHERE clause for VIEW WITH CHECK OPTION��’ü�=���Only simple column names permitted for VIEW WITH CHECK OPTIONoun”ü�U���An error was found in the application program input parameters for the SQL statement.ch •ü�t���Invalid insert or update value(s): object columns are constrained - no 2 table rows can have duplicate column values–ü�5���Arithmetic overflow or division by zero has occurred.nvaý�"���cannot access column @1 in view @2vaý�2���Too many concurrent executions of the same requestvaý�'���maximum indexes per table (@1) exceededný�&���new record size of @1 bytes is too big��ý�+���segments not allowed in expression index @1aý����wrong page typeeý����invalid ARRAY or BLOB operation�ý����@1 extension errord  ý�:���key size exceeds implementation restriction for index "@1"io!ý����definition error for index @1IEW$ý����cannot create index�;ý�-���duplicate specification of @1 - not supported CHGý�N���The insert failed because a column definition includes validation constraints.RENý�1���Cannot delete object referenced by another objectoluOý�1���Cannot modify object referenced by another objectn ePý�&���Object is referenced by another objectt Qý�$���lock on conflicts with existing lockYý�0���This operation is not defined for system tables.[ý�&���Inappropriate self-reference of column c\ý����Illegal array dimension rangeow _ý����database or file existsd`ý�(���sort error: corruption in data structureaý����node not supportedt bý�(���Shadow number must be a positive integercý�N���Preceding file did not specify length, so @1 must include starting page number��dý�-���illegal operation when at beginning of streamroneý�"���the current position is on a crack��ý�(���cannot modify an existing user privilegeý�5���user does not have the privilege to perform operationiti‘ý�K���This user does not have privilege to perform this operation on this object. ¤ý�'���transaction marked invalid by I/O errore¥ý�1���Cannot prepare a CREATE DATABASE/SCHEMA statementint¦ý�(���violation of FOREIGN KEY constraint "@1"±ý�H���The prepare statement identifies a prepare statement with an open cursor²ý����Unknown statement or requestºý�&���Attempt to update non-updatable cursorg ¼ý�S���The cursor identified in the UPDATE or DELETE statement is not positioned on a row.rÀý����Unknown cursor��Âý�;���The cursor identified in an OPEN statement is already open.�Ãý�@���The cursor identified in a FETCH or CLOSE statement is not open.þ�.���Overflow occurred during data type conversion.��!þ����null segment of UNIQUE KEYgt"þ����subscript out of boundsp&þ����data operation not supported'þ�.���invalid comparison operator for find operation��~þ�5���Cannot transliterate character between character setsdoeþ�3���count of column list and variable list do not matchs‰þ�+���Incompatible column/host variable data typetþ�7���Operation violates CHECK constraint @1 on view or tablerþ�A���internal Firebird consistency check (invalid RDB$CONSTRAINT_TYPE)iol‘þ�5���Cannot update constraints (RDB$RELATION_CONSTRAINTS).men’þ�<���Cannot delete CHECK constraint entry (RDB$CHECK_CONSTRAINTS)“þ�2���Cannot update constraints (RDB$CHECK_CONSTRAINTS).e ”þ�0���Cannot update constraints (RDB$REF_CONSTRAINTS).•þ�5���Column used in a PRIMARY constraint must be NOT NULL.ursœþ�-���index @1 cannot be used in the specified plant iþ�8���table @1 is referenced in the plan but not the from listžþ�>���the table @1 is referenced twice; use aliases to differentiateveŸþ�"���table @1 is not referenced in plangt³þ�&���Log file specification partition errorpe´þ����Cache or Log redefinedvaµþ�8���Write-ahead Log with shadowing configuration not allowed¶þ�7���Overflow log specification required for round-robin loge·þ�0���WAL defined; Cache Manager must be started first¹þ�>���Write-ahead Log without shared cache configuration not allowedioºþ�+���Cannot start WAL writer for the database @1�»þ�4���WAL writer synchronization error for the database @1¼þ�*���WAL setup error.  Please see Firebird log.$R½þ�:���WAL buffers cannot be increased.  Please see Firebird log.ry¾þ�J���WAL writer - Journal server communication error.  Please see Firebird log.e ¿þ�(���WAL I/O error.  Please see Firebird log.Àþ�-���Unable to roll over; please see Firebird log.ustÁþ����obsoleteÂþ����obsoleteÃþ����obsoleteÄþ����obsoleteÅþ�%���database does not use Write-ahead Log plÆþ�(���Cannot roll over to the next log file @1Çþ����obsoleteÈþ����obsoleteÉþ����Cache or Log size too small Êþ�7���Log record header too small at offset @1 in log file @2nËþ�1���Incomplete log record at offset @1 in log file @2ad Ìþ�*���Unexpected end of log file @1 at offset @2��Íþ�-���Database name in the log file @1 is different-roÎþ�B���Log file @1 not closed properly; database recovery may be requireditÏþ�;���Log file @1 not latest in the chain but open flag still set�Ðþ����Invalid version of log file @1seÑþ����Log file header of @1 too smalleÒþ����obsoleteÝþ����table @1 is not defined.èþ����invalid ORDER BY clause�êþ�*���Column does not belong to referenced tableirëþ�$���column @1 is not defined in table @2ìþ����Undefined namer.íþ����Ambiguous column reference.�ÿ����function @1 is not definedd 
ÿ�#���Invalid data type, length, or value ÿ����Invalid number of arguments�ÿ�)���dbkey not available for multi-table views���ÿ�,���number of columns does not match select listÿ�3���must specify column name for view select expression�ÿ�2���@1 is not a valid base table of the specified viewco!ÿ�W���This column cannot be updated because it is derived from an SQL function or expression.�"ÿ�r���The object of the INSERT, DELETE or UPDATE statement is a view for which the requested operation is not permitted.reOÿ����Invalid StringlePÿ�
���Invalid token chQÿ����Invalid numeric literal�cÿ�>���An error occurred while trying to update the security databasesmdÿ����non-SQL security class defineds eÿ�+���ODS versions before ODS@1 are not supported�fÿ����Table @1 does not existegÿ����View @1 does not existishÿ����At line @1, column @2���iÿ����At unknown line and columncojÿ�,���Column @1 cannot be repeated in @2 statementkÿ�>���Too many values (more than @1) in member list to match againstarlÿ�7���Array and BLOB data types not allowed in computed field�mÿ�:���Implicit domain name @1 not allowed in user created domainfynÿ�6���scalar operator used on field @1 which is not an arraylioÿ�"���cannot sort on more than 255 items��pÿ�#���cannot group on more than 255 items qÿ�c���Cannot include the same field (@1.@2) twice in the ORDER BY clause with conflicting sorting options�rÿ�c���column list from derived table @1 has more columns than the number of items in its SELECT statement sÿ�c���column list from derived table @1 has less columns than the number of items in its SELECT statementetÿ�A���no column name specified for column number @1 in derived table @2QL uÿ�;���column @1 was specified multiple times for derived table @2uvÿ�D���Internal dsql error: alias type expected by pass1_expand_select_nodewÿ�7���Internal dsql error: alias type expected by pass1_fieldoxÿ�J���Internal dsql error: column position out of range in pass1_union_auto_castthyÿ�>���Recursive CTE member (@1) can refer itself only in FROM clausepezÿ� ���CTE '@1' has cyclic dependencies{ÿ�8���Recursive member of CTE can't be member of an outer join|ÿ�=���Recursive member of CTE can't reference itself more than onceann}ÿ�#���Recursive CTE (@1) must be an UNIONn~ÿ�5���CTE '@1' defined non-recursive member after recursiveme ÿ�*���Recursive member of CTE '@1' has @2 clause��€ÿ�O���Recursive members of CTE (@1) must be linked with another members via UNION ALLiÿ�+���Non-recursive member is missing in CTE '@1'd‚ÿ����WITH clause can't be nested ƒÿ�0���column @1 appears more than once in USING clause„ÿ�&���feature is not supported in dialect @1ed…ÿ����CTE "@1" is not used in querycif†ÿ�.���column @1 appears more than once in ALTER VIEWal‡ÿ�:���@1 is not supported inside IN AUTONOMOUS TRANSACTION block��ˆÿ�%���Unknown node type @1 in dsql/GEN_exprass‰ÿ�6���Argument for @1 in dialect 1 must be string or numericngŠÿ�,���Argument for @1 in dialect 3 must be numeric‹ÿ�@���Strings cannot be added to or subtracted from DATE or TIME typesŒÿ�I���Invalid data type for subtraction involving DATE, TIME or TIMESTAMP typesÿ�ÿ�8���Adding two DATE values or two TIME values is not allowedŽÿ�;���DATE value cannot be subtracted from the provided data typefÿ�2���Strings cannot be added or subtracted in dialect 3ivÿ�:���Invalid data type for addition or subtraction in dialect 3��‘ÿ�1���Invalid data type for multiplication in dialect 1 an’ÿ�)���Strings cannot be multiplied in dialect 3 me“ÿ�1���Invalid data type for multiplication in dialect 3nes”ÿ�8���Division in dialect 1 must be between numeric data types•ÿ�&���Strings cannot be divided in dialect 3�–ÿ�+���Invalid data type for division in dialect 3@—ÿ�C���Strings cannot be negated (applied the minus operator) in dialect 3I˜ÿ�/���Invalid data type for negation (minus operator)p™ÿ�0���Cannot have more than 255 items in DISTINCT listD#�V���Row not found for fetch, update or delete, or the result of a query is an empty table.riE#�+���segment buffer length shorter than expectedI
$����Datatype needs modificationoD%�&���Duplicate column or domain name found.P ƒJ����invalid block type encountered o„J����wrong packet typeall…J����cannot map pagec†J�&���request to allocate invalid block typeef‡J�7���request to allocate block type larger than maximum size�ˆJ� ���memory pool free list is invalid‰J����invalid pool id encounteredpŠJ����attempt to release free blockgs ‹J�9���attempt to release block overlapping following free block muŒJ�5���attempt to release block overlapping prior free blockt bJ�*���cannot sort on a field that does not exist bŽJ����database file not availableaJ����cannot assert logical lockecJ����wrong ACL versiont b‘J����shadow block not foundpe’J�%���shadow lock not synchronized properly fo“J�$���root file name not listed for shadow”J�'���failed to remove symbol from hash table�•J����cannot find tip page–J����invalid rsb type—J����invalid SEND request˜J�"���looper: action not yet implementedte™J����return data type not supported mšJ�$���unexpected reply from journal server›J�&���journal server is incompatible versionouœJ�!���journal server refused connection���J�&���referenced index description not foundvažJ����index key too bigequŸJ�#���partner index description not foundm J����bad difference record���¡J�*���applied differences will not fit in recordt ¢J����record length inconsistentte£J����decompression overran buffer¤J�/���cannot reposition for update after sort for RMSe¥J�$���external access type not implemented¦J����differences record too longb§J����wrong record lengthv¨J����limbo impossible©J����wrong record versionªJ����record disappeared��«J����cannot delete system tablesd¬J����cannot update erased recordo­J�1���comparison not supported for specified data typesd t®J�1���conversion not supported for specified data typesage¯J����conversion error°J����overflow during conversion��±J����null or invalid arrayent²J����BLOB not founda ³J����cannot update old BLOBex´J����relation for array not knownµJ����field for array not knowne v¶J�!���array subscript computation errornne·J����expected field nodei¸J����invalid BLOB IDu¹J����cannot find BLOB pageequºJ����unknown data typecri»J�&���shadow block not found for extend fileee¼J����index inconsistent��½J����index bucket overfilledl¾J����exceeded index level¿J����page already in useeÀJ����page not accessed for writerÁJ�$���attempt to release page not acquiredÂJ����page in use during flushÃJ�:���attempt to remove page from dirty page list when not there��ÄJ����CCH_precedence: block markedÅJ����insufficient cache sizerÆJ�$���no cache buffers available for reuseÇJ�,���page @1, page type @2 lock conversion deniedÈJ�!���page @1, page type @2 lock deniedforÉJ����buffer marked for updateÊJ����CCH: @1, status = @2 (218)fiËJ����request of unknown resourceeÌJ����release of unknown resourceiÍJ����(CMP) copy: cannot remapÎJ����bad BLR -- invalid stream���ÏJ�-���argument of scalar operation must be an arrayt kÐJ�"���quad word arithmetic not supported�ÑJ�&���data type not supported for arithmetic��ÒJ����request size limit exceeded ÓJ�!���cannot access field @1 in view @2J�ÔJ����cannot access field in view @1 bÕJ� ���EVL_assign_to: invalid operationÖJ����EVL_bitmap: invalid operation���×J����EVL_boolean: invalid operationdyØJ����EVL_expr: invalid operationoÙJ�#���eval_statistical: invalid operation ÚJ�-���Unimplemented conversion, FAO directive O,Z,Spt ÛJ�+���Unimplemented conversion, FAO directive X,U�ÜJ� ���Error parsing RDB FAO msg stringÝJ����Error parsing RDB FAO msg stro cÞJ�&���unknown parameter in RdB status vector1,ßJ�#���Firebird status vector inconsistent�àJ�,���Firebird/RdB message parameter inconsistencyáJ�$���error parsing RDB FAO message stringâJ����unimplemented FAO directiverãJ�&���missing pointer page in DPM_data_pages�äJ����Fragment does not exist�åJ�&���pointer page disappeared in DPM_deletentæJ�*���pointer page lost from DPM_delete_relationadçJ� ���missing pointer page in DPM_dumpèJ����cannot find record fragmenttéJ�#���pointer page vanished from DPM_next�êJ����temporary page buffer too small�ëJ����damaged data pageld ìJ����header fragment length changed��íJ�*���pointer page vanished from extend_relationL_îJ�8���pointer page vanished from relation list in locate_spaceïJ����cannot find free spaceliðJ�$���pointer page vanished from mark_fullñJ����bad record in RDB$PAGES�òJ����page slot not emptyAóJ����bad pointer pageôJ����index unexpectedly deleted�õJ�3���scalar operator used on field which is not an arrayeöJ����actives ÷J�	���committedireøJ����rolled backiùJ����in an ill-defined stateBúJ�5���next transaction older than oldest active transaction meûJ�.���next transaction older than oldest transaction��üJ�!���buffer marked during cache unwindJ�ýJ�%���error in recovery! database corruptedageþJ�)���error in recovery! wrong data page recordlosÿJ�(���error in recovery! no space on data page�K�+���error in recovery! wrong header page recordmK�.���error in recovery! wrong generator page record��K�+���error in recovery! wrong b-tree page recordaK�3���error in recovery! wrong page inventory page record�K�,���error in recovery! wrong pointer page recordK�/���error in recovery! wrong index root page recordaK�0���error in recovery! wrong transaction page recordK�9���error in recovery! out of sequence log record encountered���K�$���error in recovery! unknown page type	K�&���error in recovery! unknown record typeal
K�<���journal server cannot archive to specified archive directoryK�7���checksum error in log record when reading from log filetK�$���cannot restore singleton select data
K�'���lock not found in internal lock managernK����size of opt block exceeded�K����Too many savepointscK�"���garbage collect record disappearedabK����Unknown BLOB FILTER ACTION_cK����error during savepoint backout��K����cannot find record back versioneK����Illegal user_type. wK����bad ACLeK����inconsistent LATCH_mark releasegK����inconsistent LATCH_mark callK�!���inconsistent latch downgrade callK�K����bdb is unexpectedly markedinK����missing exclusive latch�K�2���exceeded maximum number of shared latches on a bdb��K����can't find shared latchrK�/���Non-zero use_count of a buffer in the empty quecK�$���Unexpected page change from latchingK�!���Invalid expression for evaluationK� K�5���RDB$FLAGS for trigger @1 in RDB$TRIGGERS is corruptedver!K� ���Blobs accounting is inconsistent"K�2���Found array data type with more than 16 dimensions��˜����Statement failed, SQLSTATE = @1n˜�%���usage:    isql [options] [<database>]ton˜����Unknown switch: @1ot˜�4���Use CONNECT or CREATE DATABASE to specify a database˜����Unable to open @1sav˜�!���Commit current transaction (y/n)?sap˜����Committing.n˜����Rolling back work.�˜����Command error: @1t b˜�3���Enter data or NULL for each column.  RETURN to end.e˜����ISQL Version: @1˜�E���	-a(ll)                  extract metadata incl. legacy non-SQL tablesrk ˜�!���Number of DB pages allocated = @1cal˜����Sweep interval = @1e˜����Number of wal buffers = @1��˜����Wal buffer size = @1 ˜����Check point length = @1�!˜����Check point interval = @1K�"˜����Wal group commit wait = @1 i#˜����Base level = @1�$˜����Transaction in limbo = @1ing%˜����Frontend commands: f&˜�6���BLOBVIEW <blobid>          -- view BLOB in text editorRS'˜�1���BLOBDUMP <blobid> <file>   -- dump BLOB to a fileK�(˜�>���EDIT     [<filename>]      -- edit SQL script file and executeen)˜�@���INput    <filename>        -- take input from the named SQL file*˜�8���OUTput   [<filename>]      -- write output to named file+˜�K���SHELL    <command>         -- execute Operating System command in sub-shelli,˜�/���HELP                       -- display this menur-˜�
���Set commands:rro.˜�9���    SET                    -- display current SET optionsd.e/˜�A���    SET AUTOddl            -- toggle autocommit of DDL statements in0˜�A���    SET BLOB [ALL|<n>]     -- display BLOBS of subtype <n> or ALL˜�1˜�B���    SET COUNT              -- toggle count of selected rows on/off��2˜�8���    SET ECHO               -- toggle command echo on/off3˜�F���    SET STATs              -- toggle display of performance statisticsse4˜�@���    SET TERM <string>      -- change statement terminator string5˜�8���SHOW     <object> [<name>] -- display system information6˜�O���    <object> = CHECK, COLLATION, DATABASE, DOMAIN, EXCEPTION, FILTER, FUNCTION,n7˜�5���EXIT                       -- exit and commit changes   8˜�8���QUIT                       -- exit and roll back changes9˜�6���All commands may be abbreviated to letters in CAPitals��:˜�4���	SET SCHema/DB <db name> -- changes current database;˜����Yesh<˜�K���Current memory = !c
Delta memory = !d
Max memory = !x
Elapsed time= !e sec
o=˜�=���Cpu = !u sec
Buffers = !b
Reads = !r
Writes = !w
Fetches = !f˜�>˜�7���BLOB display set to subtype @1. This BLOB: subtype = @2e?˜�*���BLOB: @1, type 'edit' or filename to load>la@˜����Enter @1 as Y/M/D>ALA˜�	���Enter @1>ET B˜����Bad date @1-C˜����CON> ���D˜�C���    SET LIST               -- toggle column or table display format E˜����@1 not foundF˜�A���Errors occurred (possibly duplicate domains) in creating @1 in @2ingG˜�2���Server version too old to support the isql command  H˜����Records affected: @1I˜����Unlicensed for database "@1"J˜�K���    SET WIDTH <col> [<n>]  -- set/unset print width to <n> for column <col>TK˜�A���    SET PLAN               -- toggle display of query access plan   L˜�J���    SET TIME               -- toggle display of timestamp with DATE values lM˜�E���EDIT                       -- edit current command buffer and executeaseN˜�5���OUTput                     -- return output to stdout meO˜�?���    SET NAMES <csname>     -- set name of runtime character set P˜�M���               GENERATOR, GRANT, INDEX, PROCEDURE, ROLE, SQL DIALECT, SYSTEM,btyQ˜�3���    SET BLOB               -- turn off BLOB displayaR˜�>���SET      <option>          -- (Use HELP SET for complete list)�S˜�$���There are no tables in this databaseT˜�%���There is no table @1 in this databasecolU˜�#���There are no views in this databasefV˜�$���There is no view @1 in this databaseW˜�1���There are no indices on table @1 in this databasen tX˜�.���There is no table or index @1 in this databasefeY˜�%���There are no indices in this database˜�Z˜�&���There is no domain @1 in this databasein[˜�%���There are no domains in this databaseET \˜�)���There is no exception @1 in this databaseess]˜�(���There are no exceptions in this database^˜�&���There is no filter @1 in this database�_˜�%���There are no filters in this databaset c`˜�5���There is no user-defined function @1 in this database  -a˜�4���There are no user-defined functions in this databaseb˜�)���There is no generator @1 in this database   c˜�(���There are no generators in this databased˜�:���There is no privilege granted on table @1 in this databasetue˜�E���There is no privilege granted on stored procedure @1 in this database���f˜�9���There is no table or stored procedure @1 in this database nog˜�0���There is no stored procedure @1 in this databaseh˜�/���There are no stored procedures in this database i˜�2���There are no triggers on table @1 in this databasehij˜�0���There is no table or trigger @1 in this databasek˜�&���There are no triggers in this databasebal˜�;���There are no check constraints on table @1 in this databasesm˜�.���Buffers = !b
Reads = !r
Writes !w
Fetches = !fnon˜�0���Single isql command exceeded maximum buffer sizeo˜�#���There are no roles in this databaselp˜�@���There is no table, stored procedure, or role @1 in this databaseq˜�?���There is no membership privilege granted on @1 in this databasear˜�*���Expected end of statement, encountered EOFasu˜����Bad TIME: @1v˜�3���               TABLE, TRIGGER, VERSION, USERS, VIEWgw˜�$���There is no role @1 in this databasex˜�5���	-b(ail)                 bail on errors (set bail on)hisy˜����Incomplete string in @1�z˜�4���    SET SQL DIALECT <n>    -- set sql dialect to <n>{˜�.���There is no privilege granted in this databases |˜�L���    SET PLANONLY           -- toggle display of query plan without executing}˜�C���    SET HEADING            -- toggle display of query column titlesr~˜�R���    SET BAIL               -- toggle bailing out on errors in non-interactive modehe˜�0���	-c(ache) <num>          number of cache buffers€˜����Enter @1 as H:M:S> !˜�#���Enter @1 as Y/MON/D H:MIN:S[.MSEC]> ‚˜����Bad TIMESTAMP: @1izeƒ˜�2���There are no comments for objects in this databaseis„˜�!���Printing only the first @1 blobs.n t…˜����Tables:�†˜�
���Functions:mb‡˜����At line @1 in file @21 iˆ˜����After line @1 in file @2‰˜�'���There is no trigger @1 in this database Š˜�7���	-ch(arset) <charset>    connection charset (set names)V‹˜�@���	-d(atabase) <database>  database name to put in script creationŒ˜�4���	-e(cho)                 echo commands (set echo on)˜�)���	-ex(tract)              extract metadata���������*���ä��>���Ô��[��� ��u��������x��¢���h��µ���P��Ë���L��Ü���@#��í���'����è*����À.��0��2��C��P6��W��D:��l��D>��‚��4B��•���F��¨��àI��¶��ˆM��Ä��LQ��Í��4U��Û��4Y��ì��]��ú��Ü`���� d����xh��1��l��@��p��L��Äs��\��hw��n��P{��{��P��Š��Dƒ��›��4‡��+'��‹��H'��äŽ��b'��Ô’��‚'��Ж��˜'��Àš��°'��Àž��Ñ'��¸¢��÷'��¬¦��(��˜ª��+(��|®��?(��x²��X(��P¶��v(��Pº��–(��H¾��µ(��,Â��Ë(��Æ��á(��Ê��)��Î��0N��Ò��HN��øÕ��_N��ðÙ��uN��ÐÝ��N��Àá��¤N��¸å��¶N��¤é��ÉN��hí��ÛN��dñ��ïN��Xõ��O��Tù��O��Dý��2O��<�IO��4�\O��	�nO��ô�>u��Ô�Uu��È�ku��¨�u��¨�™u��€ �t�h$�…�<(�8�,�§8�0�Ã8�4�Þ8�ø7�ö8�ì;�
9�Ü?�$9�ØC�59�¸G�M9�K�]9�€O�o9�lS�ÂÔ�<W�ÖÔ�4[�òÔ� _�	Õ�c�$Õ�g�<Õ�ìj�ZÕ�Øn�sÕ�Àr�ˆÕ�¬v�¡Õ�¤z�³Õ�`~�ÆÕ�@‚�ØÕ�$†�ïÕ�Š��Ö��Ž�2ü�Ø‘�‡ü�h•�ý�d™�eý�\�'þ�L¡�µþ�(¥�Ìþ�©�!ÿ�­�qÿ�Ȱ�ÿ�À´�ÿ� ¸�ˆJ� ¼� J�ˆÀ�¼J�`Ä�ÕJ�TÈ�ìJ�4Ì�K�Ð�K�èÓ�˜�Ô×�1˜�¸Û�C˜�¬ß�S˜�ˆã�e˜�„ç�y˜�Hë�˜� ï�Ž˜�/���	-i(nput) <file>         input file (set input)o˜�-���	-m(erge)                merge standard erroraba˜�)���	-m2                     merge diagnosticdis‘˜�<���	-n(oautocommit)         no autocommit DDL (set autoddl off)’˜�-���	-now(arnings)           do not show warnings   “˜�1���	-o(utput) <file>        output file (set output) no”˜�$���	-pag(elength) <size>    page length•˜�,���	-p(assword) <password>  connection password–˜�A���	-q(uiet)                do not show the message "Use CONNECT...": @—˜�"���	-r(ole) <role>          role namect˜˜�6���	-r2 <role>              role (uses quoted identifier) t™˜�6���	-s(qldialect) <dialect> SQL dialect (set sql dialect) @š˜�6���	-t(erminator) <term>    command terminator (set term)r ›˜�"���	-u(ser) <user>          user namehaœ˜�)���	-x                      extract metadata-d(˜�8���	-z                      show program and server versionž˜� ���missing argument for switch "@1"Ÿ˜�/���argument "@1" for switch "@2" is not an integer� ˜�*���value "@1" for switch "@2" is out of rangenp¡˜�1���switch "@1" or its equivalent used more than onceaba¢˜�'���more than one database name: "@1", "@2"i£˜�!���No dependencies for @1 were founduto¤˜�)���There is no collation @1 in this database)  ¥˜�5���There are no user-defined collations in this database   ¦˜����Collations:u§˜�$���There are no security classes for @1¨˜�(���There is no database-wide security class©˜�5���Cannot get server version without database connectionmesª˜�5���	-nod(btriggers)         do not run database triggers na«˜�;���	-tr(usted)              use Windows trusted authenticationt¬˜����BULK> di­˜����There are no connected users®˜����Users in the databaseato¯˜����Output was truncated°˜����Valid options are:u(±˜�1���	-f(etch_password)       fetch password from file   ²˜�)���could not open password file @1, errno @2   ³˜�)���could not read password file @1, errno @2ng ´˜����empty password file @1��µ˜�M���    SET ROWCOUNT [<n>]     -- limit select stmt to <n> rows, zero is no limitlen!¿����GSEC>han"¿����gsec#¿����ADD            add user:$¿����DELETE         delete users %¿����DISPLAY        display user(s)o &¿����MODIFY         modify user�'¿����PW             user's passwordns(¿����UID            user's ID)¿����GID            user's group IDcl*¿�"���PROJ           user's project nameid+¿�'���ORG            user's organization nameo,¿� ���FNAME          user's first name-¿�)���MNAME          user's middle name/initialger.¿����LNAME          user's last namee/¿����unable to open databaset0¿����error in switch specificationson1¿����no operation specifiedhe2¿����no user name specified t3¿����add record error4¿����modify record errorh5¿����find/modify record error6¿����record not found for user: @1ssw7¿����delete record error�8¿����find/delete record error9¿����users defined for nodepa:¿�?���     user name                    uid   gid admin     full name�;¿�`���------------------------------------------------------------------------------------------------<¿����find/display record error  a=¿�$���invalid parameter, no switch defined>¿����operation already specified(?¿����password already specifiedus@¿����uid already specifieder'A¿����gid already specified   B¿����project already specified  uC¿����organization already specified uD¿����first name already specifiedE¿����middle name already specified���F¿����last name already specified�G¿����gsec versionH¿����invalid switch specifiedI¿����ambiguous switch specifiedeeJ¿�%���no operation specified for parameters inK¿�(���no parameters allowed for this operationL¿����incompatible switches specifiedtM¿�/���gsec utility - maintains user password database�N¿����command line usage:rO¿����<command> [ <parameter> ... ]sswP¿����interactive usage:r�Q¿����available commands:eR¿����adding a new user:foS¿����add <name> [ <parameter> ... ]  T¿����deleting a current user:U¿�
���delete <name>---V¿����displaying all users:---W¿����display-X¿����displaying one user:Y¿����display <name>ayZ¿����modifying a user's parameters:te[¿�-���modify <name> <parameter> [ <parameter> ... ]ed(\¿����help:ord]¿����? (interactive only)^¿����help_¿����quit interactive session:pec`¿����quit (interactive only) a¿����available parameters:ionb¿����-pw <password>�c¿�
���-uid <uid>ead¿�
���-gid <uid>��e¿����-proj <projectname>ef¿����-org <organizationname>pg¿����-fname <firstname>onh¿����-mname <middlename>ii¿����-lname <lastname>tchj¿����gsec - memory allocation errorfik¿�
���gsec errorinl¿�,���Invalid user name (maximum 31 bytes allowed)m¿�6���Warning - maximum 8 significant bytes of password usedntn¿����database already specified��o¿�-���database administrator name already specified.. p¿�1���database administrator password already specifieds:eq¿����SQL role name already specified r¿����[ <options> ... ]]  s¿����available options:��t¿�#���-user <database administrator name>au¿�+���-password <database administrator password>uv¿�,���-role <database administrator SQL role name>w¿����-database <database to manage><px¿����-z[ y¿����displaying version number:rdz¿����z (interactive only){¿�%���-trusted (use trusted authentication)pec|¿�,���invalid switch specified in interactive mode}¿����error closing security database�~¿�,���error releasing request in security database¿�-���-fetch_password <file to fetch password from>fna€¿�!���error fetching password from filee>i¿�7���error changing AUTO ADMINS MAPPING in security databaser‚¿�?���changing admins mapping to RDB$ADMIN role in security database:oƒ¿�<���invalid parameter for -MAPPING, only SET or DROP is accepted„¿����mapping {set|drop}pe…¿����use gsec -? to get helps†¿����-admin {yes|no}c‡¿�8���invalid parameter for -ADMIN, only YES or NO is accepted0æ�?���The license file does not exist or could not be opened for read�1æ�.���                 S T O P -- S T O P -- S T O Pas2æ�8���    Your node is not registered to run InterBase.
    @13æ�B���    If you are using this node to demonstrate software, or because��4æ�D���    the registered node is temporarily unavailable, you may continue5æ����    by closing this window.n6æ�����7æ�=���    To register this node for InterBase, call (800) 437-7367, se8æ�B���    from outside the United States and Canada call (408) 431-5400,��9æ�1���    between 9 am and 8 pm, Monday through Friday,rro:æ�!���    Pacific time (GMT + 8 hours).rro;æ�5���    Be prepared to provide the following information.han<æ����        Your version is "@1"=æ����        Your @1         @1va>æ�+���    Processing will continue in @1 seconds.e?æ�7���        Software theft is a civil and criminal offense.s@æ�7���Copyright (c) 1985, 1994 by Borland International, Inc.nAæ�����Bæ�"���InterBase License Utility Version:oeCæ����operation already specifiedfDæ����no operation specified��Eæ����invalid switch  Fæ����invalid switch combination�Gæ�$���illegal operation/switch combinationHæ����ambiguous switchIæ�&���invalid parameter, no switch specifiedsoJæ�"���switch does not take any parametererKæ����switch requires a parameter Læ����syntax error in command lineMæ�d���The operation was completed successfully.  Please restart the server for the changes to take effect.Næ�J���The certificate was not added.  A duplicate ID exists in the license file.n Oæ�I���The certificate was not added.  Invalid certificate ID / Key combination.rroPæ�j���The certificate was not removed.  The key does not exist or corresponds to a temporary evaluation license.  Qæ�B���An error occurred updating the license file.  Operation cancelled.�Ræ�r���The certificate could not be validated based on the information given.  Please recheck the ID and key information..nSæ�-���Operation failed.  An unknown error occurred.æ�Tæ�,���Add license operation failed, KEY: @1 ID: @2Uæ�(���Remove license operation failed, KEY: @1Væ�+���Simultaneous user license for one (1) user.aWæ�-���Simultaneous user license for four (4) users., nXæ�-���Simultaneous user license for five (5) users.parYæ�-���Simultaneous user license for ten (10) users.yntZæ�0���Simultaneous user license for twenty (20) users.[æ�#���Local InterBase activation license.r\æ�S���InterBase Server activation license and simultaneous user licnese for one (1) user.t]æ�"���Firebird Server: Client capabilityic^æ�*���Firebird Server: Remote access capability.om_æ�%���Firebird Server: Metadata capability.emo`æ�U���InterBase server activation license and simultaneous user license for five (5) users.roraæ�V���InterBase server activation license and simultaneous user license for unlimited users.bebæ�-���Internet access license with unlimited users.checæ�.���Simultaneous user license for unlimited users.eddæ�"���Precompiler license for C and C++.d eæ����Precompiler license for Ada.fæ� ���Precompiler license for Fortran.gæ����Precompiler license for Cobol.nshæ����Precompiler license for Pascal.siæ�U���Evaluation InterBase Server license and simultaneous user license for five (5) users.æ�jæ�S���Customized license entry created by means other than entering a certificate ID/key.wkæ�l���The evaluation license has already been used on this server.  You need to purchase a non-evaluation license.@
�n���The connection request was refused.  This can occur if the Firebird server is not started on the host machine. cA
�+���The request was canceled before completing.iB
�G���There are too many open files.  No more file descriptors are available.sC
�:���The packet was too large for the buffer and was truncated.e D
�I���The requested winsock protocol is not supported by the TCP implemenation.se E
�E���The TCP socket type is not supported in the requested address family..edF
�#���The TCP operation is not supported. G
�/���The requested protocol family is not supported.�H
�F���The requested address family is not supported by this protocol family.nsI
�(���The specified address is already in use.J
�>���The specified address is not available from the local machine.fiK
�M���The winsock implemenation has detected that the network subsystem has failed. a L
�:���The network cannot be reached from this host at this time.n M
�,���The network dropped the connection on reset.N
�=���The connection was aborted due to a timeout or other failure. ocO
�,���The connection was reset by the remote host.P
�3���Insufficient buffer space or sockets are available.iQ
� ���The socket is already connected.R
����The socket is not connected.S
�@���Cannot send or receive data on a socket which has been shutdown.T
�4���Request timed out without establishing a connection.U
����The requested host is down.�V
����No route to the requested host. W
����Operation already in progress.��X
�2���A blocking winsock request is already in progress.��Y
�9���The request would cause the non-blocking socket to block.tocZ
�"���The network subsystem is unusable.is[
�=���The version of winsock.dll is not usable by this application.he \
�3���Windows sockets have not been initialized properly.t]
�M���The host was not found or is unreachable over the specified network protocol.m t^
�(���The IPX/SPX software is not initialized._
�C���The Firebird server is not responding or has closed the connection.e`
�C���The Firebird server is not responding or has closed the connection..a
�"���Specified connection is not valid.tsb
�!���The SPX connection table is full.eadc
�#���The socket has already been closed.cd
����Malformed or overflow packet.ta e
�9���SPX is not installed or the specified socket is not open.houf
�*���Pipe does not exist or is no longer valid.hog
�%���There is not enough available memory. hoh
����Bad length in command.ini
�*���Pipe has been closed or is not being read.alj
����The input buffer is too small.��k
����The Network is busy.l
����No process slots are available.cm
�^���The remote host is not responding or you may lack proper security to access network resources.ppn
�!���The specified path was not found.noto
����The named pipe is busy.�p
�@���The specified network resource or device is no longer available.q
� ���Not enough DOS memory available.r
�%���Not enough event control blocks free.er s
�!���Lock on network resources failed.ctit
�8���The request exceeds the maximum IPX/SPX resource limits.u
�,���The IPX/SPX software is already initialized.v
�"���The remote computer not available.s w
�'���A duplicate name exists on the network.sx
����The network path was not found.ty
�0���The network BIOS command limit has been reached.z
�*���A network adapter hardware error occurred.no{
�<���The specified server cannot perform the requested operation.|
�%���An unexpected network error occurred.bee}
�%���The remote adapter is not compatible.���~
�2���The specified network name is no longer available.va
����Network access is denied.s n€
�)���The network resource type is not correct.acc
�!���The network name cannot be found.fie‚
�H���The name limit for the local computer network adapter card was exceeded.ƒ
�,���The network BIOS session limit was exceeded.„
�%���The network request was not accepted.ot …
�&���A write fault occurred on the network.ck†
�7���The server disconnected from the other end of the pipe. ‡
�t���Beginning database sweep, which can take a long time.  This can be controlled by varying the sweep interval.  Sweep?ˆ
�L���A sweep must be performed on this database before it can be started.  Sweep?‰
����Not enough disk space remainingdQ4����found unknown switchR4�$���please retry, giving a database nameS4�.���Wrong ODS version, expected @1, encountered @2quT4� ���Unexpected end of database file.U4����gstat version @1V4����
Database "@1"ptW4����

Database file sequence:is X4����File @1 continues as file @2Y4����File @1 is the @2 filenaZ4����
Analyzing database pages ...etw[4�1���    Primary pointer page: @1, Index root page: @2 is\4�9���    Data pages: @1, data page slots: @2, average fill: @3���]4����    Fill distribution:om^4����    Index @1 (@2)d w_4�'���	Depth: @1, leaf buckets: @2, nodes: @3m`4�4���	Average data length: @1, total dup: @2, max dup: @3a4����	Fill distribution:cb4����    Expected data on page @1c4�-���    Expected b-tree bucket on page @1 from @2
�d4����unknown switch "@1"pe4����Available switches:ef4�(���    -a      analyze data and index pagesg4����    -d      analyze data pagese h4�$���    -h      analyze header page ONLYi4�$���    -i      analyze index leaf pagesj4����    -l      analyze log pagek4�?���    -s      analyze system relations in addition to user tablesol4�"���    -z      display version numberexm4����Can't open database file @1�n4����Can't read a database page"@o4����System memory exhaustedup4����    -u      usernameq4����    -p      passwordr4�5���    -r      analyze average record and version lengthry s4�6���    -t      tablename <tablename2...> (case sensitive): t4�&���    -tr     use trusted authentication�u4�$���    -fetch  fetch password from filev4�@���option -h is incompatible with options -a, -d, -i, -r, -s and -tw4�A���usage:   gstat [options] <database> or gstat <database> [options]n:cx4�#���database name was already specified�y4����option -t needs a table namez4�&���option -t got a too long table name @1��{4�C���option -t accepts several table names only if used after <database>�|4����table "@1" not found}4����use gstat -? to get helpa[����Wrong value for access mode b[����Wrong value for write mode  c[����Wrong value for reserve spaces  d[�@���Unknown tag (@1) in info_svr_db_info block after isc_svc_query()e[�+���Unknown tag (@1) in isc_svc_query() resultsbf[����Unknown switch "@1"eg[����Service Manager Versionth[����Server version�i[����Server implementation���j[����Path to firebird.msgk[����Server root l[����Path to lock files vm[����Security database   n[�	���Databases <to[����   Database in useivp[����   Number of attachmentsq[����   Number of databases  r[����Information truncatediles[�(���Usage: fbsvcmgr manager-name switches...t[�B���Manager-name should be service_mgr, may be prefixed with host nameatu[�A���according to common rules (host:service_mgr, \\host\service_mgr).���v[�:���Switches exactly match SPB tags, used in abbreviated form. nw[�D���Remove isc_, spb_ and svc_ parts of tag and you will get the switch.x[�A���For example: isc_action_svc_backup is specified as action_backup,���y[�&���             isc_spb_dbname => dbname,e z[�@���             isc_info_svc_implementation => info_implementation,{[�>���             isc_spb_prp_db_online => prp_db_online and so on.n |[�P���You may specify single action or multiple info items when calling fbsvcmgr once.}[����Full command line samples:��~[�`���fbsvcmgr service_mgr user sysdba password masterke action_db_stats dbname employee sts_hdr_pages[�?���  (will list header info in database employee on local machine)t€[�b���fbsvcmgr yourserver:service_mgr user sysdba password masterke info_server_version info_svr_db_infome[�@���  (will show firebird version and databases usage on yourserver)‚[����Transaction @1 is in limbotoƒ[�(���Multidatabase transaction @1 is in limbo„[�
���Host Site: @1hes…[����Transaction @1s,†[����has been prepared. n‡[����has been committedanˆ[����has been rolled back‰[����is not availableŠ[����Remote Site: @1t‹[����Database Path: @1ed Œ[�0���Automated recovery would commit this transaction[�2���Automated recovery would rollback this transactiononŽ[�,���No idea should it be commited or rolled back[����Wrong value for shutdown modeo o[����could not open file @1ng‘[����could not read file @1ms’[�
���empty file @1r o”[�*���Invalid or missing parameter for switch @1��q‚�I���Switches trusted_svc and trusted_role are not supported from command line em©����ERROR: @1.\n‚©�G���Physical Backup Manager    Copyright (C) 2004 Firebird development team�ƒ©�>���  Original idea is of Sean Leyne <sean@@broadviewsoftware.com>ve„©�E���  Designed and implemented by Nickolay Samofatov <skidder@@bssys.com>es …©�F���  This work was funded through a grant from BroadView Software, Inc.\ntr†©����Usage: nbackup <options>‡©����valid options are:anˆ©�I���  -L <database>                         Lock database for filesystem copyeen‰©�I���  -N <database>                         Unlock previously locked database: @Š©�L���  -F <database>                         Fixup database after filesystem copy‹©�A���  -B <level> <database> [<filename>]    Create incremental backup orŒ©�B���  -R <database> [<file0> [<file1>...]]  Restore incremental backup f©�1���  -U <user>                             User namee @Ž©�0���  -P <password>                         Password©�@���  -FE <file>                            Fetch password from file©�D���  -T                                    Do not run database triggers‘©�O���  -S                                    Print database size in pages after locka’©�=���  -Z                                    Print program versionmof“©����Notes:@b”©�'���  <database> may specify database aliasu•©�C���  incremental backups of multi-file databases are not supported yet>–©�=���  "stdout" may be used as a value of <filename> for -B option   —©����PROBLEM ON "%s".Æ©�T���  -D [ON | OFF]                         Use or not direct I/O when scanning databaseŸ˜� ÷�´˜�û�:¿�Øþ�T¿�Ô�s¿�È�0æ�¸
�Dæ�Œ�Tæ�x�eæ�X�G
�4�X
�$�j
�ô!�}
�Ø%�X4�¤)�p4� -�i[�Œ1�}[�€5�”[�X9�Ž©�<=�ÿÿÿÿ A�˜� ó�ÿÿÿÿœC�